General Cable Anaconda® Brand Type SHD-GC Power Shielded Round Portable w/Ground-Check EPR CPE 5000 Volts Three Conductor

General Cable Anaconda® Brand Type SHD-GC Power Shielded Round Portable w/Ground-Check EPR CPE 5000 Volts Three Conductor

Select gauge from drop-down menu for prices:

General Cable Anaconda® Brand Type SHD-GC Power Shielded Round Portable w/Ground-Check EPR CPE 5000 Volts Three Conductor

Product Details

Conductor: 6 AWG thru 500 kcmil coated annealed copper, bunched wires, rope-lay-stranded per ASTM B172

Extruded Strand Shield (ESS): Extruded thermosetting semi-conducting stress control layer over conductor

Insulation: Ethylene Propylene Rubber (EPR) insulation colored for contrasting with black conducting layer

Insulation Shield: A flexible coated copper/textile braid shield is applied over a non-conducting overlapped tape

Ground-Check Conductor: Annealed copper, rope-lay-stranded per ASTM B172, insulated with high-strength yellow polypropylene

Grounding Conductors:
• Coated copper, rope-lay-stranded per ASTM B172
• Two conductors in contact with the flexible copper braid shield

Jacket: Reinforced, two-layer, extra-heavy-duty, leadcured Chlorinated Polyethylene (CPE)

Jacket Marking: GENERAL CABLE® ANACONDA® BRAND (SIZE) 3/C TYPE SHD-GC 5000 VOLTS P-7K-102-046 MSHA

Options:
• Colored jackets are available
• TPU (Thermoplastic Polyurethane) jacket
• Anamaxx® jacket

Applications:
• Designed for use as a trailing cable on AC mining equipment:
 - Where service conditions are severe and maximum safety is mandatory (such as power shovels and draglines in open-pit mines, quarries, gantry cranes and slag reclaiming)
 - For high-voltage distribution in underground mines where frequent relocation is necessary

Features:
• Simultaneous extrusion and vulcanization of both strand shield and insulation form a virtually perfect electrode, eliminating unequal electrical stresses
• Excellent heat, moisture, steam, oil, corona, chemical and radiation resistance
• Flexible for easy handling
• High dielectric strength
• Electrical stability under stress
• Low dielectric loss
• Resists cutting, impact, abrasion, flame and sunlight
• Excellent thermal stability and physical properties over a broad temperature range
• Two-layer jacket is reinforced to provide maximum protection from mechanical damage— the cause of most portable cable failures

Compliances:
• ICEA S-75-381 Portable and Power Feeder Cables for use in mines and similar applications
• Meets flame test requirements and is accepted for listing by MSHA
• Approved by the Pennsylvania Department of Environmental Protection

Packaging: Material cut to length and shipped on nonreturnable reels

cond. size
(awg /Kcmil)
no. of cond. ampacity general cable and
anaconda brand
part number
Action
6 3 93 16241.210600 Request a Quote
4 3 122 16204.858221 Request a Quote
2 3 159 16202.317964 Request a Quote
1 3 184 16201.396409 Request a Quote
1/0 3 211 16241.615100 Request a Quote
2/0 3 243 16252.271926 Request a Quote
3/0 3 279 16241.215300 Request a Quote
4/0 3 321 16254.730315 Request a Quote
250 3 355 16241.216000 Request a Quote
300 3 398 16241.216300 Request a Quote
350 3 435 16262.687414 Request a Quote
500 3 536 16265.570479 Request a Quote

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question