General Cable Armored Instrumentation XLPE Pairs Triads Individual and Overall Shield UL Type ITC-HL PLTC 300V Sunlight-Resistant Direct Burial UL Marine Shipboard Cable ABS CWCMC CCW®

General Cable Armored Instrumentation XLPE Pairs Triads Individual and Overall Shield UL Type ITC-HL PLTC 300V Sunlight-Resistant Direct Burial UL Marine Shipboard Cable ABS CWCMC CCW®

Select gauge from drop-down menu for prices:

General Cable Armored Instrumentation XLPE Pairs Triads Individual and Overall Shield UL Type ITC-HL PLTC 300V Sunlight-Resistant Direct Burial UL Marine Shipboard Cable ABS CWCMC CCW®

Product Details

Conductor: 
• Bare annealed copper per ASTM B3 
• Class B stranding per ASTM B8

Insulation: 
• Cross-Linked Polyethylene (XLPE), rated 90°C per UL Standards 13 and 2250 
• Color-coded per ICEA Method 1: pairs – black and white; triads – black, white and red. Each conductor in each pair or triad is printed alphanumerically for easy identification

Shielded Pairs/Triads: 
• Isolated and individually twisted pairs or triads with a Flexfoil® aluminum/ polyester tape shield providing   100% coverage 
• Stranded tinned copper drain wire, two sizes smaller than insulated conductors

Cable Assembly: 
• Individually shielded pairs or triads and communication wire are cabled together with a left-hand lay 
• Communication wire: 20 AWG solid bare copper, Cross-Linked Polyethylene (XLPE), rated 90°C, orange

Overall Shield: 
• Flexfoil® aluminum/polyester tape shield providing 100% coverage 
• Stranded tinned copper drain wire, same size as insulated conductors

Inner Jacket: 
• Flame-retardant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250, black 
• Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C 
• Nylon rip cord to facilitate jacket removal

CCW Armor: 
• Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 
• CCW armor conductivity meets the grounding requirements of NEC Article 250

Overall Jacket: 
• Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250,  black 
• Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C

Applications: 
• CCW armored Instrumentation cables with individually shielded pairs or triads and an overall shield provide superior protection and reliability against    physical damage for use in instrumentation and process control applications requiring ITC-HL or PLTC wiring methods where shielding against both external  EMI and EMI between groups is required 
• For use as Power Limited Tray Cable on circuits rated 150 V or less and 5 amps or less in Class 2 or Class 3 circuits in accordance with NEC Article 725 
• For use as Instrumentation Tray Cable on circuits rated 150 V or less and 5 amps or less in accordance with NEC Article 727 
• Recognized for use in Class I and III, Divisions 1 and 2; Class II, Division 2; or Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503    and 505  
• Installed indoors or outdoors, in wet or dry locations, in a raceway, as aerial cable on a messenger, in cable trays, or for direct burial 
• Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute

Features: 
• CCW armor provides superior mechanical protection and an impervious barrier to moisture, gas and liquids 
• CCW armor provides EMI shielding    performance 
• Meets cold impact at -40°C

Specifications:

Design Adherence: 
• UL 13 Power-Limited Circuit Cables 
• UL 2250 Instrumentation Tray Cable 
• UL 1569 Metal Clad Cables 
• UL 1309/CSA C22.2 No. 245 Marine Shipboard Cable

Flame Tests: 
• ICEA T-29-520 (210,000 BTU/hr) 
• IEEE 383 (70,000 BTU/hr) 
• CSA FT4 
• IEEE 1202 (70,000 BTU/hr) 
• UL 1581 (70,000 BTU/hr) 
• IEC 60332-3 Cat. A

Compliances:
• UL Type PLTC, SUN RES, DIR BUR, -40°C, UL File # E36118 
• UL Type ITC-HL, UL File # E177408 
• UL Listed Marine Shipboard, UL File # E85994 
• American Bureau of Shipping (ABS) Listed for CWCMC 
• RoHS Compliant

cond. Size (AWG) No. of pairs approximate Net weight General cable part number Action
Lbs/1000Ft Kg/Km
16 awg 7w (1.31 mm²) overall shielded pairs
16 1 207 308 9150.16010001* Request a Quote
16 2 351 522 9150.16021201 Request a Quote
16 4 509 757 9150.16041201 Request a Quote
16 8 798 1,188 9150.16081201 Request a Quote
16 12 1,075 1,600 9150.16121201 Request a Quote
16 16 665 990 9150.16161201 Request a Quote
16 24 1,790 2,664 9150.16241201 Request a Quote
16 36 2,405 3,579 9150.16361201 Request a Quote
16 50 3,366 5,009 9150.16501201 Request a Quote
16 awg 7w (1.31 mm²) overall shielded triads
16 1 158 235 9150.16010002* Request a Quote
16 2 461 686 9150.16021202 Request a Quote
16 4 605 900 9150.16041202 Request a Quote
16 8 992 1,476 9150.16081202 Request a Quote
16 12 1,312 1,952 9150.16121202 Request a Quote
16 16 965 1,436 9150.16161202 Request a Quote
16 24 2,313 3,442 9150.16241202 Request a Quote
16 36 3,140 4,673 9150.16361202 Request a Quote
16 50 4,270 6,354 9150.16501202 Request a Quote

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question