Amercable Tiger Brand Type SHD-CGC 3/C Mold-cured Jacket 2000V and 5000 Volts Mining Cable 36-505

Amercable Tiger Brand Type SHD-CGC 3/C Mold-cured Jacket 2000V and 5000 Volts Mining Cable 36-505

Amercable Tiger Brand Type SHD-CGC 3/C Mold-cured Jacket 2000V and 5000 Volts Mining Cable 36-505

Type SHD-CGC cable comes in flexible tinned copper wires with a ground check conductor. The copper conductors are closely bonded with a ground check conductor that has a yellow color coded insulation; the tinned copper conductors are then insulated with an EPR. Ethylene Propylene Rubber insulation is shielded with a tinned copper and nylon braided layer and covered with a semiconducting stranded shield and taped. Non-conducting separating tape is again applied round the core to hold the conductors firmly in their position. A grounding wire is then laid on the assembly and jacketed with a CPE. 

Standards and Approvals

1.ICEA S-75-381, NEMA WC-58
2.ASTM B-172 and ASTM B-33
3.Mining Safety and Health Administration as per 7K-184 MSHA
4.P-184 for environmental protection
5.CSA C 22.2 #96
6.CSA File 82346, FT1 and FT5

Tiger Brand Type SHD-CGC power cable is made of top quality products that meets all the above listed specification standards, and approved worthy of serving its intended purpose.

Tinning of copper conductors of this cable improves their protective attribute by keeping the conductors safe from corrosive chemicals. Corrosion of conductors would cause damages to the power lines leading to power faults. The use of flexible copper conductors affirms the flexibility of Tiger Brand Type SHD-CGC cable making it easy to install.

Superb Ethylene Propylene Insulation and Chlorinated Polyethylene (CPE) jacketing offers a great protection against harsh environmental conditions to this cable and the user as well. EPR insulation keeps the user from electrocution and the copper conductors from chemical and mechanical damages. CPE jacketing is the outer covering coat that provides the outermost defensive mechanism to fungal attack, deformations, sunlight radiations, corrosion and moisture hence improving the service life of the cable.

Applications
This cable is intended to serve in mining power distribution channels for voltages not exceeding 2000V at an optimal operating temperature of 900C. It is installed in applications of loaders, conveyors, drills, pumps and equipment requiring ground checking conductor.

power conductors ampacity* 40°c
ambient temp
amercable and
Tiger brand
part number
Action
size awg no .of wires
per conductor
36-505 type shd-cgc 3/c 2000 volts
2/0 323 243 36-505-020 Request a Quote
3/0 418 279 36-505-030 Request a Quote
4/0 532 321 36-505-040 Request a Quote
350 888 435 36-505-350 Request a Quote
36-506 type shd-cgc 3/c 5000 volts
2/0 323 243 36-506-020 Request a Quote
3/0 418 279 36-506-030 Request a Quote
4/0 532 321 36-506-040 Request a Quote
350 888 435 36-506-350 Request a Quote

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question