General Cable EmPowr® 25 kV Copper Tape PVC Jacket Link and Shielded Power Cable Al Conductor TRXLPE Insulation

General Cable EmPowr® 25 kV Copper Tape PVC Jacket Link and Shielded Power Cable Al Conductor TRXLPE Insulation

Product Details

Complete Cable: Lead-free cross-linked semi-conducting conductor shield, insulation and semi-conducting insulation shield are extruded over a solid or stranded aluminum conductor and cured in a single operation. Uncoated copper tape (helically applied) and overlaying black PVC jacket are applied over the cable core. These products meet the latest requirements of ANSI/ICEA S-97-682 and AEIC CS8 as applicable for Tree-Retardant Cross-linked Polyethylene (TRXLPE) insulated shielded power cable. 

Conductor: Solid or Class B compressed concentric lay stranded 1350 aluminum. 

Conductor Shield: Extruded lead-free semi-conducting thermosetting polymeric stress control layer. 

Insulation: Extruded unfilled lead-free Tree-Retardant Cross-linked Polyethylene (TRXLPE). 

Insulation Shield: Extruded lead-free semi-conducting thermosetting layer, clean and free stripping from insulation. 

Copper Tape: Flat uncoated 5-mil-thick copper tape helically applied with minimum 15% overlap. 

Jacket: Black, non-conducting, sunlight-resistant Polyvinyl Chloride (PVC). 

Features and Benefits: 
• Lead-free environmentally friendly cable 
• Triple-extruded for clean interfaces 
• Dry nitrogen cure for enhanced performance 
• Class 10,000 environment utilized for cable core material handling 
• Excellent moisture resistance 
• High dielectric strength 
• Low dielectric loss 
• Excellent resistance to water treeing 
• Clean-stripping insulation shield 
• Sunlight-resistant 

Temperature Rating: 
• Normal - 90°C 
• Emergency* - 130°C 
• Short Circuit - 250°C 

Applications: EmPowr® Link+ cables are intended for use in dry or wet locations for distribution of threephase medium-voltage power. These cables may be installed in ducts or direct buried. 

Options: 
• Copper conductors 
• STRANDFILL® blocked conductor. Tested in accordance with ICEA T-31-610 
• True Triple Extrusion 
• UltraPowr® smoother and cleaner semiconducting conductor shield 
• Low-strip insulation shield 
• 3 X 1/C triplex or parallel 
• 3 shielded cores cabled with fillers, with or without ground conductor, and with an overall jacket 
• Type MV-90 UL 1072
• TRXLPE Class III insulation for 105°/140°C temperature rating 
• Type MV-105 UL 1072 
• UL Listed 
• EPR insulation – see Uniblend® in our Industrial catalog

compressed
conductor
ampacity (2) Action
al awg/ kcmil no. of wires direct buried in duct
1 19 185 145 Request a Quote
1/0 19 215 165 Request a Quote
2/0 19 245 185 Request a Quote
3/0 19 275 215 Request a Quote
4/0 19 315 250 Request a Quote
250 37 350 275 Request a Quote
350 37 420 335 Request a Quote
500 37 515 405 Request a Quote
750 61 650 520 Request a Quote
1000 61 755 605 Request a Quote

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question