General Cable EmPowr® 15 kV Longitudinally Applied Corrugated Tape LLDPE Jacket Fill Shielded Power Cable Al Conductor EPR Insulation

General Cable EmPowr® 15 kV Longitudinally Applied Corrugated Tape LLDPE Jacket Fill Shielded Power Cable Al Conductor EPR Insulation

Select gauge from drop-down menu for prices:

General Cable EmPowr® 15 kV Longitudinally Applied Corrugated Tape LLDPE Jacket Fill Shielded Power Cable Al Conductor EPR Insulation

Product Details

Complete Cable: Cross-linked semi-conducting conductor shield, insulation and semi-conducting insulation shield are extruded over a solid or stranded aluminum conductor and cured in a single operation. Corrugated copper tape and an extruded black jacket are applied over the cable core. These products meet the latest requirements of ANSI/ICEA S-97-682 and AEIC CS8 as applicable for Ethylene Propylene Rubber (EPR) insulated shielded power cable.

Conductor: Solid or Class B compressed concentric lay stranded 1350 aluminum.

Conductor Shield: Extruded semi-conducting thermosetting polymeric stress control layer.

Insulation: Extruded Ethylene Propylene Rubber (EPR) Class II and III.

Insulation Shield: Extruded semi-conducting thermosetting layer, clean and free stripping from insulation.

Longitudinally Applied Corrugated Tape: Copper, 8 or 10 mil thick Longitudinally Applied Corrugated Tape (LACT) with a minimum 375 mil overlap.

Jacket: Black, non-conducting, sunlight-resistant, Linear Low-Density Polyethylene (LLDPE).

Features and Benefits:
• Even distribution of fault current and better heat dissipation
• Allows expansion/contraction of cable core
• Improved bending characteristics versus helical copper tape shield
• Triple-extruded for clean interfaces
• Class 10,000 environment utilized for cable core material handling
• Flexibility for easy handling
• Excellent moisture resistance
• Deformation-resistant
• High dielectric strength
• Low dielectric loss
• Excellent resistance to water treeing
• Clean-stripping insulation shield without the use of a release agent
• Sunlight-resistant

Temperature Rating:
• Normal - 105°C
• Emergency* - 140°C
• Short Circuit - 250°C

Applications: EmPowr® Fill cables are intended for use in dry or wet locations for distribution of three-phase medium-voltage power. These cables may be installed in ducts or direct buried.

Options:
• Copper conductors
• EmPowr® Fill LF Lead-Free EAM
• STRANDFILL® blocked conductor. Tested in accordance with ICEA T-31-610
• BIFILL® tested to ICEA T-34-664 1. blocked conductor 2. blocked cable core/LACT
• TRIFILL® tested to ICEA T-34-664 1. blocked conductor 2. blocked cable core/LACT 3. sealed overlap and blocked LACT/jacket
• Sealed LACT overlap
• Dry nitrogen cure
• True Triple Extrusion
• Red stripes on jacket
• Semi-conducting thermoplastic jacket
• 3 X 1/C triplex or parallel
• Type MV-90 UL 1072
• UL Listed

compressed
conductor
diameter (1)
inches
nominal
thkn.
inches
(1)
approx. weight (1)
lb/1000 ft
ampacity (2)
al
awg or
kcmil
no.
of
wires
insulation lact shield lldpe
jacket
al
cond.
cu
shield
total direct
buried
in
duct
min. max. thkn. o.d.
175 mils nominal epr insulation – 15 kv 100% insulation level
250 37 0.920 1.005 0.008 1.104 1.264 0.080 234 131 860 370 285
250 37 0.920 1.005 0.010 1.110 1.270 0.080 234 164 895 370 285
350 37 1.015 1.100 0.008 1.207 1.367 0.080 329 157 1037 445 345
350 37 1.015 1.100 0.010 1.213 1.373 0.080 329 191 1073 445 345
500 37 1.150 1.235 0.008 1.335 1.495 0.080 468 157 1250 545 425
500 37 1.150 1.235 0.010 1.355 1.515 0.080 468 220 1323 545 425
750 61 1.340 1.425 0.008 1.536 1.696 0.080 703 199 1645 665 530
750 61 1.340 1.425 0.010 1.542 1.702 0.080 703 243 1691 665 530
1000 61 1.485 1.575 0.008 1.685 1.905 0.110 937 208 2077 780 630
1000 61 1.485 1.575 0.010 1.691 1.911 0.110 937 260 2130 780 630
220 mils nominal epr insulation – 15 kv 133% insulation level
250 37 1.010 1.100 0.008 1.194 1.354 0.080 234 140 961 370 285
250 37 1.010 1.100 0.010 1.200 1.360 0.080 234 191 1012 370 285
350 37 1.105 1.190 0.008 1.297 1.457 0.080 329 157 1137 445 345
350 37 1.105 1.190 0.010 1.303 1.463 0.080 329 191 1173 445 345
500 37 1.240 1.330 0.008 1.439 1.599 0.080 468 185 1396 545 425
500 37 1.240 1.330 0.010 1.445 1.605 0.080 468 231 1444 545 425
750 61 1.430 1.520 0.008 1.626 1.846 0.110 703 203 1871 665 530
750 61 1.430 1.520 0.010 1.632 1.852 0.110 703 254 1923 665 530
1000 61 1.575 1.670 0.008 1.775 1.995 0.110 937 222 2228 780 630
1000 61 1.575 1.670 0.010 1.781 2.001 0.110 937 277 2285 780 630

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question