Amercable Tiger Brand Type SHD-PCG Longwall Mold-cured Jacket Cable 5000 Volts 36-516

Amercable Tiger Brand Type SHD-PCG Longwall Mold-cured Jacket Cable 5000 Volts 36-516

Amercable Tiger Brand Type SHD-PCG Longwall Mold-cured Jacket Cable 5000 Volts 36-516

Conductors: Flexible tinned copper

Control Group 3 Conductors: Flexible tinned copper ethylene polypropylene rubber insulation color coded black, white, red and an overall thermosetting jacket

Insulation: 90°C ethylenepropylene rubber (EPR)

Tape: Non-conducting

Separator Tape: Non-conducting

Strand Shield: Semi-conducting layer

Insulation Shielding: Tinned copper and color-coded nylon braid

Ground Conductor: Flexible tinned copper located in the center of the cable 

Jacket: Reinforced mold-cured thermosetting Chlorinated Polyethylene (CPE) Jacket. Cable identification via permanent marking.

Application:
• Heavy duty portable power cable designed for use on longwall shearers, where three shielded power conductors, three unshielded control conductors, and a grounding conductor are required. Recommended maximum continuous conductor temperature is 90°C.
• Cable carries “P-7K-184-MSHA” marking indicating acceptance as flame resistant by the Pennsylvania Department of Environmental Protection and the Mine Safety and Health Administration.
• Tiger® Brand Mining Cable meets or exceeds ICEA Standards S-75-381/NEMA WC-58, ASTM B-172 and B-33.

Ratings & Approvals:
• Mine Safety & Health Administration 7K-184-MSHA.
• Pennsylvania Department of Environmental Protection P-7K-184.
• Tiger® Brand Mining Cables meet or exceed ICEA Standards S-75-381.

power conductors ampacity* 40°c
ambient temp
amercable and
Tiger brand
part number
Action
size awg no .of wires
per conductor
2 259 159 36-516-002 Request a Quote
1/0 266 211 36-516-010 Request a Quote
2/0 323 243 36-516-020 Request a Quote
3/0 418 279 36-516-030 Request a Quote
4/0 532 321 36-516-040 Request a Quote

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question