Amercable Tiger Brand 8 AWG Type G-GC Round 3/C Mold-cured Jacket 2000 Volts Mining Cable 36-442-008

*Data provided on this page is subject to change based on different manufacturers' variances
** Images are for display purposes only refer to Product Technical Details for accurate information on the product.
In the case the material only comes in a predetermined color or doesn’t come with any color

Product Details

Conductors : Flexible tinned copper

Ground Check Conductor : Flexible tinned copper with yellow polypropylene insulation Ground Wires Flexible tinned copper 

Insulation : 90°C ethylene-propylene rubber (EPR) 

Jacket : Reinforced mold-cured thermosetting Chlorinated Polyethylene (CPE) Jacket. Cable identification via permanent marking. 

Tape : Non-conducting

Application :  
• Especially suitable for use with mobile mining equipment such as continuous miners, drills, cutters, loading machines, AC shuttle cars and pumps. Type G-GC is for applications where grounding conductors and a ground check conductor are required. Recommended maximum continuous conductor temperature is 90°C. Suitable for shallow water submersion. 
• Cable carries “P-7K-184-MSHA” marking indicating listing by the Mine Safety and Health Administration and the Pennsylvania Department of Environmental Protection.
• Tiger® Brand Mining Cable meets or exceeds ICEA Standards S-75-381/NEMA WC-58, ASTM B-172 and B-33.

Ratings & Approvals :  
• Mine Safety & Health Administration 184-MSHA. 
• Pennsylvania Department of Environmental Protection P-184. 
• Tiger® Brand Mining Cables meet or exceed ICEA Standards S-75-381 & CSA Standards C 22.2 #96. 
• Canadian Standards Association File 82346, FT1, FT5, -50°C
 Type SHD-GC, SHD-BGC up to 25kV 
 Type W, G, G-GC, G-BGC up to 2kV