Interlocked Armor Control Cable 600 Volt UL Type MC XLP VW-1 XHHW-2 Aluminum Armor Copper Conductors

*Data provided on this page is subject to change based on different manufacturers' variances
** Images are for display purposes only refer to Product Technical Details for accurate information on the product.
In the case the material only comes in a predetermined color or doesn’t come with any color

Specifications:

• Interlocked Armor - Control Cable
• 600 Volt UL Type MC, CT Use, 90°C
• XLP VW-1 XHHW-2 Insulation
• Aluminum Armor
• Copper Conductors

Application:
For use in harsh environments where maximum conductor protection is required. Used for power, control and lighting circuits in a broad range of commercial and industrial pulp and paper, mining, and petroleum applications. Approved for use in wet or dry locations at 90°C, for installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts. May be used in NEC Class I and II, Division 2 and Class III, Division 1 and 2 hazardous locations. UL approved for use at 90°C for continuous operation, 130°C for emergency overload conditions, and 250°C for short circuit conditions. Aluminum interlocked armor cable is recommended as an economical alternative to wire in conduit systems.

Conductors:
Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 (compressed) or ASTM B-496 (compact).

Insulation:
Cross-linked polyethylene (XLP) per UL Standard 44 for Type XHHW-2, VW-1 conductors.

Grounding Conductor:
Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 sized in accordance with UL Standard 1569.

Armor:
Aluminum interlocked tape armor per UL Standard 1569. Also available in galvanized steel armor.

Jacket:
Black sunlight-resistant PVC per UL Standard 1569.

Flame Tests:
UL 1581 70,000 BTU/hr flame test

Color Code:
ICEA Method 1, Table E-2

Connectors:
Explosion Proof, Class 1 Division 2: 424CU series – aluminum exterior components, nickel-plated brass interior components Rain Tight: 416MC series – all nickel-plated brass

Size (AWG or kcmil)	No. of Conductors	Net Weight	Overall Diameter (Inches)	Insulation Thickness (Mils)	Jacket Thickness  (Mils)	No. of Strands	Ground Wire Size AWG	Product Code
14 Gauge	2	176	0.61	30	50	7	14	HW300 01402
14 Gauge	3	185	0.63	30	50	7	14	HW300 01403
14 Gauge	4	210	0.67	30	50	7	14	HW300 01404
14 Gauge	5	270	0.71	30	50	7	14	HW300 01405
14 Gauge	7	320	0.76	30	50	7	14	HW300 01407
14 Gauge	9	388	0.84	30	50	7	14	HW300 01409
14 Gauge	10	410	0.88	30	50	7	14	HW300 01410
14 Gauge	12	460	0.91	30	50	7	14	HW300 01412
14 Gauge	15	550	0.95	30	50	7	14	HW300 01415
14 Gauge	19	660	1.03	30	50	7	14	HW300 01419
14 Gauge	25	877	1.17	30	50	7	14	HW300 01425
14 Gauge	37	1200	1.32	30	50	7	14	HW300 01437
12 Gauge	2	185	0.65	30	50	7	12	HW300 01202
12 Gauge	3	215	0.69	30	50	7	12	HW300 01203
12 Gauge	4	295	0.73	30	50	7	12	HW300 01204
12 Gauge	5	325	0.76	30	50	7	12	HW300 01205
12 Gauge	7	400	0.83	30	50	7	12	HW300 01207
12 Gauge	9	460	0.90	30	50	7	12	HW300 01209
12 Gauge	10	560	0.95	30	50	7	12	HW300 01210
12 Gauge	12	615	1.00	30	50	7	12	HW300 01212
12 Gauge	15	680	1.04	30	50	7	12	HW300 01215
12 Gauge	19	900	1.16	30	50	7	12	HW300 01219
12 Gauge	25	1200	1.28	30	50	7	12	HW300 01225
12 Gauge	37	1450	1.46	30	50	7	12	HW300 01237
10 Gauge	2	230	0.70	30	50	7	10	HW300 01002
10 Gauge	3	300	0.72	30	50	7	10	HW300 01003
10 Gauge	4	345	0.79	30	50	7	10	HW300 01004
10 Gauge	5	450	0.83	30	50	7	10	HW300 01005
10 Gauge	7	560	0.89	30	50	7	10	HW300 01007
10 Gauge	9	640	0.99	30	50	7	10	HW300 01009
10 Gauge	12	880	1.13	30	50	7	10	HW300 01012
10 Gauge	15	965	1.18	30	50	7	10	HW300 01015
10 Gauge	19	1300	1.27	30	50	7	10	HW300 01019
10 Gauge	25	1500	1.42	30	50	7	10	HW300 01025
10 Gauge	37	2450	1.64	30	50	7	10	HW300 01037