*Data provided on this page is subject to change based on different manufacturers' variances
** Images are for display purposes only refer to Product Technical Details for accurate information on the product.
In the case the material only comes in a predetermined color or doesn’t come with any color

Conductor: Soft drawn stranded bare copper per ASTM B3 and ASTM B8.

Strand Shield: Extruded layer of semiconducting material.

Insulation: Cross linked polyethylene (XLPE) compound in accordance with the requirements of UL 1072 and the National Electric Code.

Applications:
• FAA MV-90 CABLES are for medium voltage power transmission of up to 5000 volts. All Draka MV-90 cables are UL listed as intended for use in accordance with NEC Article 310-6 in dry locations up to 90ºC. They may also be used as rugged cables in ducted lighting circuits (600 volt to 2400 volt).
• The 4, 6 and 8 AWG conductor cables are FAA approved for airport lighting circuits in accordance with the FAA advisory circular 150/5345-7F.
• Draka’s airport lighting cables have been reviewed and confirmed to meet the FAA guidance for using US manufactured products.
• Airport series lighting cables are suitable for use above and below ground in dry or wet locations in accordance with the Canadian Electrical Code, Part I, Section 74.

Specifications and Ratings:
• UL 1072 MV-90 DRY; 2,400 V
• ICEA S-96-659
• NEMA WC71
• FAA L-824 TYPE C; 5,000 V
• FAA (for 4, 6 & 8 AWG conductor cables)
• FAA Advisory Circular 150/5345-7F
• CSA C22.2 No. 179, Type ASLC; 5,000 V
• Low Temperature Rating: -35°C Cold Bend
• Sunlight Resistant