Prysmian and Draka Cable 3/C #400 KCM Low Voltage AIRGUARD harsh environments heavy industrial offshore VFD 600 Volt Power Cable *20127513
Select gauge from drop-down menu for prices:
Conductor: Class B stranded bare, soft drawn copper circuit conductors
Insulation: Heat and moisture resistant cross-linked polyethylene (XLPE) meeting the requirements of UL-44 for Type XHHW-2 conductors
Fillers: Extruded filler belt
Ground Wires: Class B stranded bare, soft drawn copper ground conductors
Emi Shield: Metallic tape provides 100% coverage
Polmeric Aromor/Enviromental Barrier: Foamed polymeric AIRBAG™ layer affords superior mechanical & environmental protection of the cable core
Outer Sheath:
Heat, moisture, hydrocarbon, and sunlight
resistant thermoplastic
Description:
Prysmian’s Low Voltage AIRGUARD™ Power Cables are
primarily designed for applications in the harsh environments
found in the heavy industrial and offshore markets.
Its rugged polymeric AIRBAG™ armor and chemical
barrier protection package makes it the ideal cable choice
for tough harsh environmental conditions. AIRGUARD™
provides the solution to the deficiencies often encountered
with MC-HL cables including armor breakage encountered
during installation and in applications requiring recurring
bending after installation, as well as poor performance in
areas of high vibration (e.g. motor connections). It also
provides a safer and lower installed cost alternative to
MC-HL cables due to faster, “No Knife/ No Saw” cable
preparation and substantially reduced cost of cable glands
Specifications:
ASTM B3 & ASTM B8
Class B Soft Drawn Concentric
Lay Stranded Bare Copper
Conductors
ICEA S-82-658 (NEMA WC70)
Power Cable Rating
UL 44 (XHHW-2) 600V
XHHW-2 Multiple Conductors
Direct Buried
Sunlight Resistant
O il Resistant IEEE 1202/FT-4 Flame Retardant
UL 1277 NEC Article 336.10(7)
TC-ER Exposed Run Rating
UL 2225 NEC Article 501.10(A)(2)(3)
TC-ER- HL Class I Division 1 Hazardous Locations
NEC Article 505.15(B)(1)(i)
TC-ER-HL Class I Zone 1
Hazardous Locations
CSA 22.2 No. 03
-40oC/ -35oC Cold Bend/
Cold Impact
MSHA
Mine Safety & Health
Administration
technical specification: | |
number and circuit conductor size | 3/c #400 kcm |
number of grounding conductor - (#) | 3 |
insulation thickness - (mils) | 65 |
ground wires size - (awg) | 7 awg |
conductor diameter - (inches) | 0.706 |
nominal overall insulation(od) - (inches) | 0.85 |
nominal overall cable (od ) - (inches) | 2.41 |
nominal cable weight - (lbs/mft) | 6008 |
minimum bending radius - (inches) | 17 |
‡ ampacity (amps) - (‡90°c) | 380 |
gland, explosion proof, class 1 division 1,barrier type | 424bt09 |
prysmian and draka cable part number | *20127513 |