Prysmian and Draka Cable 10 AWG 3/C Low Voltage AIRGUARD harsh environments heavy industrial offshore 600 Volt Power Cable 394077

*Data provided on this page is subject to change based on different manufacturers' variances
** Images are for display purposes only refer to Product Technical Details for accurate information on the product.
In the case the material only comes in a predetermined color or doesn’t come with any color

Conductor: Class B stranded bare, soft drawn copper circuit conductors

Insulation: Heat and moisture resistant cross-linked polyethylene (XLPE) meeting the requirements of UL-44 for Type XHHW-2 conductors

Fillers: Extruded filler belt 

Ground Wires: Class B stranded bare, soft drawn copper ground conductors

Outer Sheath:
 Heat, moisture, hydrocarbon, and sunlight resistant thermoplastic

Description:
Prysmian’s Low Voltage AIRGUARD™ Power Cables are primarily designed for applications in the harsh environments found in the heavy industrial and offshore markets. Its rugged polymeric AIRBAG™ armor and chemical barrier protection package makes it the ideal cable choice for tough harsh environmental conditions. AIRGUARD™ provides the solution to the deficiencies often encountered with MC-HL cables including armor breakage encountered during installation and in applications requiring recurring bending after installation, as well as poor performance in areas of high vibration (e.g. motor connections). It also provides a safer and lower installed cost alternative to MC-HL cables due to faster, “No Knife/ No Saw” cable preparation and substantially reduced cost of cable glands

Specifications: 
• ASTM B3 & ASTM B8 Class B Soft Drawn Concentric Lay Stranded Bare Copper Conductors
• ICEA S-82-658 (NEMA WC70) Power Cable Rating
• UL 44 (XHHW-2) 600V XHHW-2 Multiple Conductors Direct Buried Sunlight Resistant O il Resistant IEEE 1202/FT-4 Flame Retardant
• UL 1277 NEC Article 336.10(7) TC-ER Exposed Run Rating 
• UL 2225 NEC Article 501.10(A)(2)(3) TC-ER- HL Class I Division 1 Hazardous Locations
• NEC Article 505.15(B)(1)(i) TC-ER-HL Class I Zone 1 Hazardous Locations
• CSA 22.2 No. 03 -40oC/ -35oC Cold Bend/ Cold Impact
• MSHA Mine Safety & Health Administration