Digium 1PWR2401BLF Analog FXS Module Single Power Supply

*Data provided on this page is subject to change based on different manufacturers' variances
** Images are for display purposes only refer to Product Technical Details for accurate information on the product.
In the case the material only comes in a predetermined color or doesn’t come with any color

Description:

One (1) external power supply bundle for analog card station (FXS) modules. FXS modules provide ringing voltage and battery to telephones or handsets and require substantial amount of 12V DC power in order to operate properly. The PCI interface on motherboards cannot provide sufficient quantites of this voltage necessary to ring 4, 8 or 24 modules. As a solution, Digium analog cards are mounted with a 4-pin disk-drive or Molex connector on the base board. This connector must be supplied with an internal power connector from the system's power supply if FXS modules are in use.

Features and Functions:

• One (1) external power supply bundle for analog card station (FXS) modules
• Digium PWR2401B - Bracket with 1 PSU (12V) for FXS power.
• A jumper on the PWR2400B allows the two power cables to derive power from either one or two Digium 12V 5A power supplies.
• The PWR2400B is intended to be used only with UL Listed Digium analog cards.
• The PWR2400B is not intended to be powered by any supply other than Digium's own UL Listed power supply. Actual Digium transforming power supply not shown.