*Data provided on this page is subject to change based on different manufacturers' variances
** Images are for display purposes only refer to Product Technical Details for accurate information on the product.
In the case the material only comes in a predetermined color or doesn’t come with any color
Conductor:
• Bare annealed copper per ASTM B3
• Class B stranding per ASTM B8
Insulation:
• Cross-Linked Polyethylene (XLPE),
rated 90°C per UL Standards 13 and
2250
• Color-coded per ICEA Method 1:
pairs – black and white; triads – black,
white and red. Each conductor in each
pair or triad is printed alphanumerically
for easy identification
Shielded Pairs/Triads:
• Isolated and individually twisted pairs
or triads with a Flexfoil® aluminum/
polyester tape shield providing 100%
coverage
• Stranded tinned copper drain wire, two
sizes smaller than insulated conductors
Cable Assembly:
• Individually shielded pairs or triads
and communication wire are cabled
together with a left-hand lay
• Communication wire: 20 AWG solid
bare copper, Cross-Linked Polyethylene
(XLPE), rated 90°C, orange
Overall Shield:
• Flexfoil® aluminum/polyester tape shield
providing 100% coverage
• Stranded tinned copper drain wire,
same size as insulated conductors
Inner Jacket:
• Flame-retardant Polyvinyl Chloride
(PVC) per UL Standards 13 and 2250,
black
• Low temperature performance meets
ASTM D746 brittleness temperature at
or below -40°C
• Nylon rip cord to facilitate jacket
removal
CCW Armor:
• Impervious, continuously welded and
corrugated aluminum alloy sheath per
UL 1569
• CCW armor conductivity meets the
grounding requirements of NEC
Article 250
Overall Jacket:
• Flame-retardant, moisture- and
sunlight-resistant Polyvinyl Chloride
(PVC) per UL Standards 13 and 2250, black
• Low temperature performance meets
ASTM D746 brittleness temperature at
or below -40°C
Applications:
• CCW armored Instrumentation cables
with individually shielded pairs or
triads and an overall shield provide
superior protection and reliability
against physical damage for use in
instrumentation and process control
applications requiring ITC-HL or
PLTC wiring methods where shielding
against both external EMI and EMI
between groups is required
• For use as Power Limited Tray Cable
on circuits rated 150 V or less and
5 amps or less in Class 2 or Class 3
circuits in accordance with NEC Article
725
• For use as Instrumentation Tray Cable
on circuits rated 150 V or less and
5 amps or less in accordance with
NEC Article 727
• Recognized for use in Class I and III,
Divisions 1 and 2; Class II, Division 2;
or Class I, Zones 1 and 2 hazardous
locations per NEC Articles 501, 502,
503 and 505
• Installed indoors or outdoors, in wet or
dry locations, in a raceway, as aerial
cable on a messenger, in cable trays,
or for direct burial
• Recognized for use on fixed or
floating offshore petroleum facilities
as recommended by the American
Petroleum Institute
Features:
• CCW armor provides superior
mechanical protection and an
impervious barrier to moisture,
gas and liquids
• CCW armor provides EMI shielding performance
• Meets cold impact at -40°C
Specifications:
Design Adherence:
• UL 13 Power-Limited Circuit Cables
• UL 2250 Instrumentation Tray Cable
• UL 1569 Metal Clad Cables
• UL 1309/CSA C22.2 No. 245 Marine
Shipboard Cable
Flame Tests:
• ICEA T-29-520 (210,000 BTU/hr)
• IEEE 383 (70,000 BTU/hr)
• CSA FT4
• IEEE 1202 (70,000 BTU/hr)
• UL 1581 (70,000 BTU/hr)
• IEC 60332-3 Cat. A
Compliances:
• UL Type PLTC, SUN RES, DIR BUR,
-40°C, UL File # E36118
• UL Type ITC-HL, UL File # E177408
• UL Listed Marine Shipboard, UL File #
E85994
• American Bureau of Shipping (ABS)
Listed for CWCMC
• RoHS Compliant
| technical specification: | |
|
cond. size (awg)
|
16 |
| no. of pairs | 36 |
| insulation thickness (mils) | 30 |
| insulation thickness (mm) | 0.76 |
| communication wiresizeawg | 20 |
| communication wireins. thickness(mils) | 15 |
| communication wireins. thickness(mm) | 0.38 |
| inner jacket thickness (mils) | 140 |
| inner jacket thickness (mm) | 3.56 |
| nominal core o.d. (inches) | 2.08 |
|
nominal core o.d. (mm)
|
52.8 |
| nominal armor o.d. (inches) | 2.45 |
| nominal armor o.d.(mm) | 62.2 |
| jacket thickness (mils) | 60 |
| jacket thickness (mm) | 1.52 |
| nominal overall o.d. (inches) | 2.28 |
| nominal overall o.d. (mm) | 65.5 |
| crosssectional area¹sq. in. | 5.30 |
|
approximate net weight (lbs/1000 ft)
|
3,140 |
| approximate net weight (kg/1000 m) | 4,673 |
| catalog number | 9150.16361202 |