SHD-GC - 250MCM
SHD-GC - 250MCM
SKU: SKU:
- SHD-GC - 250MCM
- SHD-GC - 250MCM
Couldn't load pickup availability
*Data provided on this page is subject to change based on different manufacturers' variances
** Images are for display purposes only refer to Product Technical Details for accurate information on the product.
In the case the material only comes in a predetermined color or doesn’t come with any color
Product Details
| Technical Specifications: | |
| Number of Conductors in Cable: | 3 |
| Nominal Jacket Thickness (Inches): | .220 |
| Nominal Insulation Thickness (Inches): | .095 |
| Ground Wire Size (AWG): | 1/0 |
| Ground Wire No. Strands: | 133 |
| Size AWG: | 250 |
| Stranding: | 427 |
| Diameter Complete Cable (O.D.) (Inches): | -- |
| Weight Per 1000ft Total (Lbs.): | 5950 |
| General Cable Part # | 16241.216000 |
Applications: This cable is designed for high voltage connections between power distribution systems in mines, mine tunnels, shafts, and mine load centers where continuous monitoring of the ground system is required. This cable is suitable for installation in Ducts, troughs, tray or direct burial for nonflexing service.
Construction:Conductor is stranded annealed copper enveloped in a strand shield. Insulation is Ethylene Proplylene Rubber (EPR) or Cross Linked Polyethylene (XLPE). Assembly is semi-conducting tape and a metallic tape shield with grounding conductors consisting of two bare grounds and one 8-gauge insulated ground check that are cabled together in the interstices of the power conductors and fillers are added to make round. A single faced rubber filled tape is applied overlapped. Jacket is Chlorinated Polyethylene (CPE). Standards Conforms to ICEA S-66-524 (NEMA WC8).