Home / HW151 Tray Cable - Control Cable 600 Volt UL Type TC-ER* THHN or THWN Insulation PVC Jacket / HW151 Tray Cable - Control Cable 600 Volt UL Type TC-ER* THHN or THWN Insulation PVC Jacket - 12 AWG -12 Conductors
  • HW151 Tray Cable - Control Cable 600 Volt UL Type TC-ER* THHN or THWN Insulation PVC Jacket - 12 AWG -12 Conductors
1 1

HW151 Tray Cable - Control Cable 600 Volt UL Type TC-ER* THHN or THWN Insulation PVC Jacket - 12 AWG -12 Conductors

HW151 Tray Cable - Control Cable 600 Volt UL Type TC-ER* THHN or THWN Insulation PVC Jacket - 12 AWG -12 Conductors

SKU:  

Select a gauge:
  • HW151 Tray Cable - Control Cable 600 Volt UL Type TC-ER* THHN or THWN Insulation PVC Jacket - 12 AWG -12 Conductors
Length: FT
Enter footage in the box - Cut to one length. Min 1 ft - Max 10000 ft.
Sold out
Shipping calculated at checkout.
Shipping Available
Free shipping on orders above $1000. *Wires and cables only.
View full details
Product Information Reviews
Product Information

HW151 Tray Cable - Control Cable 600 Volt UL Type TC-ER* THHN or THWN Insulation PVC Jacket - 12 AWG -12 Conductors

Technical Specifications:
Product Code HW151 01212
Size AWG 12
No. of Conductors 12
No. of Strands 7
Ground Wire Size AWG N/A
Nylon Jacket Thickness Mils 4
Insulation Thickness Mils 15
Jacket Thickness Mils 60
Overall Diameter Inch 0.69
Net Weight Lbs/Mft 378

Specifications:

  • HW151
  • Tray Cable - Control Cable
  • 600 Volt UL Type TC-ER*
  • THHN or THWN Insulation
  • PVC Jacket

Notes:
* Flat Construction

Application:
General purpose cable for use in power, control and lighting circuits in a broad range of commerical and industrial applications. Approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts. May be used in NEC Class I and II, Division 2 hazardous locations. UL approved for use in continuous operation at 75°C in wet locations, 90°C in dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.

Conductors:
Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8.

Insulation: XLPE:
Flame-retardent PVC per UL Standard 83 stranding per ASTM B-8.

Insulation Jacket:
Clear nylon per UL Standard 83 for Type THHN or THWN wire.

Jacket:
Sunlight-resistant PVC per UL Standard 1277.

Flame Tests:
IEEE 383 70,000 BTU/hr flame test

Color Code:
ICEA Method 1, Table E-2

Additional Standards:

  • UL Type TC per Article 336 of the NEC
  • Approved for Class 1 remote-control and signaling circuits per Article 725 of the NEC

Reviews