HW355 Telephone Cable Filled, Direct Burial RUS / REA Specification PE-89 - 19 AWG - 50 Pairs

*Data provided on this page is subject to change based on different manufacturers' variances
** Images are for display purposes only refer to Product Technical Details for accurate information on the product.
In the case the material only comes in a predetermined color or doesn’t come with any color

Product Details

Specifications:

• HW355
• Telephone Cable
• Filled, Direct Burial
• RUS / REA Specification PE-89

Application:
For use in wet environments where protection from moisture is required. Approved for direct burial, duct or aerial installations when supported by a messenger.

Conductors:
Solid soft bare annealed copper. Individual conductors are twisted into pairs with varying lay lengths to minimize crosstalk.

Insulation:
Dual layer of foamed polyolefin and solid polyolefin.

Filling Compound:
Cable core is filled with an extended thermoplastic rubber (ETPR) filling the interstices between the pairs and under the core tape.

Core Wrap:
Non-hygroscopic, dielectric tape with overlap.

Shield:
Corrugated, copolymer coated, 8-mil aluminum tape longitudinally applied with overlap. The shield interfaces are flooded with an adhesive compound to provide a moisture barrier and inhibit corrosion.

Jacket:
Black, sunlight-resistant, linear low-density polyethylene.

Color Code:
Color code chart 5.

Additional Standards:
ANSI/ICEA S-84-608-1994 • RUS 7 CFR 1755.890 (formerly REA PE-89)