Power Cable - 2 Gauge Unishield 15KV UL Type MV-105 Single Conductor, Shielded EPR CPE 15KV 100% Insulation Level Copper Conductor

Power Cable - 2 Gauge Unishield 15KV UL Type MV-105 Single Conductor, Shielded EPR CPE 15KV 100% Insulation Level Copper Conductor

Power Cable - 2 Gauge - Unishield
Technical Specifications:
Size (AWG or kcmil): 2
No. of Strands 7
Insulation Thickness (Mils): 175
Jacket Thickness (Mils): 80
Insulation Diameter (Inches): 0.66
Drain Wire Size AWG 19
Conducter Diameter (Inches): 0.27
Overall Diameter (Inches): 0.84
Net Weight 501

Specifications:

  • HW 209
  • Power Cable - Unishield
  • 15KV UL Type MV-105, 105°C
  • Single Conductor, Shielded
  • EPR Insulation, CPE Jacket
  • 15KV 100% Insulation Level
  • Copper Conductor

Application:
For use in power circuits up to 15KV when installed in open air, conduit, duct, cable tray when CT rated, or direct buried in earth, in wet and dry locations. Used for critical applications in harsh and caustic environments in chemical plants, refineries, steel mills, industrial plants, commercial buildings, utility substations and generating stations. UL approved for use at 105°C for continuous operation, 140°C for emergency overload conditions, and 250°C for short circuit conditions.

Conductors:
Compact soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-496, with a semi-conducting conductor shield.

Insulation:
Ethylene propylene rubber (EPR) per ICEA S-97-682.

Shield:
Six (6) corrugated copper shield wires longitudinally embedded in an exterior semi-conducting CPE jacket per ICEA S-97-682.

Jacket:
Sunlight-resistant CPE per ICEA S-97-682 and UL Standard 1072.

Flame Tests:
IEEE 383 70,000 BTU/hr flame test – CT-listed sizes 1/0AWG and larger

Additional Standards:

  • ICEA S-93-639
  • NEMA WC74
  • AEIC CS8
  • Note:
  • CT rated on sizes 1/0 AWG and larger.

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question