Complete Cable: Cross-linked semi-conducting conductor shield, insulation and semi-conducting insulation shield are extruded over a solid or stranded aluminum conductor and cured in a single operation. Uncoated copper neutral wires (helically applied) and extruded-to-fill black jacket are applied over the cable core. These products meet the latest requirements of ANSI/ICEA S-94-649, AEIC CS8 and RUS U1 as applicable for Ethylene Propylene Rubber (EPR) insulated concentric neutral cable.
Conductor: Solid or Class B compressed concentric lay stranded 1350 aluminum.
Conductor Shield: Extruded semi-conducting thermosetting polymeric stress control layer.
Insulation: Extruded Ethylene Propylene Rubber (EPR) Class II and III.
Insulation Shield: Extruded semi-conducting thermosetting layer, clean and free stripping from insulation.
Concentric Neutral: Helically applied, annealed, solid bare copper wires.
Jacket: Black, non-conducting, sunlight-resistant, Linear Low-Density Polyethylene (LLDPE) extruded to fill spaces between neutral wires.
Features and Benefits:
• Triple extruded for clean interfaces
• Class 10,000 environment utilized for cable core material handling
• Flexibility for easy handling
• Excellent moisture resistance
• Deformation-resistant
• High dielectric strength
• Low dielectric loss
• Excellent resistance to water treeing
• Clean-stripping insulation shield without the use of a release agent
• Sunlight-resistant
Temperature Rating:
• Normal - 105°C
• Emergency* - 140°C
• Short Circuit - 250°C
| technical specification: | |
| compressed conductor(al awg or kcmil) | 1 |
| compressed conductor(no.of wires) | 1 |
| copper neutral(no.of wires) | 20 |
|
copper neutral(wire size awg)
|
16 |
| diameter (1)inches(insulation in min.) | 0.735 |
| diameter (1)inches(insulation in max.) | 0.820 |
|
diameter (1)inches(encap lldpe jacket)
|
1.035 |
| nominal jacket thkn.inches(1) | 0.055 |
| approx. weight (1)lb/1000 ft(al cond.) | 77 |
| approx. weight (1)lb/1000 ft(cu neut.wires) | 168 |
| approx. weight (1) lb/1000 ft(total) | 590 |
| ampacity (2)(direct buried) | 215 |
| ampacity (2)(induct) | 150 |
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.