22 AWG Solid BC HydroBloc 2 Conductor Shielded Cables

22 AWG Solid BC HydroBloc 2 Conductor Shielded Cables

22 AWG Solid BC HydroBloc 2 Conductor Shielded Cables

The Gepco® Brand HydroBloc™ shielded/unshielded speaker and control cables are ideal for permanent installation in wet locations. The conductors consist of stranded, bare copper conductors that are insulated with a PVC insulation compound. For added noise rejection and suppression, the conductors are shielded with a durable 100% foil/Mylar® and tinned copper drain wire. The outer jacket is extruded from a low-friction PVC that is easy to install and pull through conduit. Gepco Brand shielded and unshielded speaker and control cables are available in 18 and 22 AWG. With advanced water-blocked construction, the HydroBloc line utilizes a two-ply water-blocking tape and waterswellable fillers to prevent transverse and longitudinal water ingress. 

Features & Benefits:
• Advanced Water-Blocked Construction 
• Sunlight- and Moisture-Resistant Jacket 
• Cables Comply with TIA-455-82-B Water Penetration Test 
• Ripcord for Ease of Stripping Jacket 
• Bare Copper Conductors 
• Superior PVC Insulation 
• 18 and 22 AWG Versions 
• UL Rated 

Applications:
• In Wet Locations Inside Conduit 
• Indoor/Outdoor Use 
• Speaker Interconnections 
• General Purpose Audio 
• Communications & Power-Limited Circuits

technical specification:
conductor 22 awg solid bc
# of cond. 2
nominal od 0.192“(5.00 mm)
insulation/color code pvc, 0.010” (0.254 mm)/black, red
shield 100% foil
drainwire 24 awg solid tc
jacket(type, colors) pvc, gray
ul type cm/cl3
approx. weight 22 lbs/mft (33 kg/km)
general cable and gepco brand part number hbs2220

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question