• Type MC-HL CSA Type HL XLPE 600V Armored Power 3/C VFD and 4/C UL Cable Tray Use Sunlight-Resistant Direct Burial UL Marine Shipboard Cable ABS CWCMC CCW

    Product Details

    Conductor:
    • Bare annealed copper per ASTM B3
    • 10 AWG and smaller are Class B compressed stranding per ASTM B8
    • 8 AWG and larger are compact stranding per ASTM B496

    Insulation:
    • Cross-linked Polyethylene (XLPE) insulation per ICEA S-95-658 and UL 44, Listed XHHW-2
    • 6 AWG and smaller are color-coded per ICEA Method 1, Table E2
    • 4 AWG and larger are black with printed numbers per ICEA Method 4
    • Color-coded per CSA C22.2 No. 123 where applicable

    Grounding Conductor(s):
    • Class B stranded bare annealed copper per ASTM B3 and B8
    • Where specified, single or three split grounding wires are sized in accordance with NEC Table 250.122

    Cable Assembly:
    • Insulated conductors and grounding wire(s) are cabled together with nonhygroscopic fillers when required
    • A binder tape is applied over the cabled core

    CCW Armor:
    • Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 and UL 2225
    • CCW armor conductivity meets the grounding requirements of NEC Article 250

    Jacket:
    • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black
    • Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C
    • Meets CSA Low Acid Gas requirements

    Applications:
    • Variable Frequency Drives: 3-conductor CCW armored cables with three (3) symmetrical grounding wires are the preferred wiring methodfor use with AC motors controlled by pulse-width modulated inverters in VFD applications
    • CCW armored cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods
    • For use in Class I, II and III, Divisions 1 and 2; and Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503 and 505
    • For use as services, feeders and branch circuits for power, lighting,control, and signal circuits in accordance with NEC Articles 330 and 725
    • Installed indoors or outdoors, wet or dry locations, directly buried, embedded in concrete, in a raceway,as aerial cable on a messenger, in cable trays, or as exposed runs secured to supports in accordance with NEC Article 330
    • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute

    Features:
    • 3-conductor CCW power cables with three grounding wires are recommended for use with pulse-width modulated AC drives
    • CCW armor provides an impervious barrier to moisture, gas and liquids
    • CCW armor provides EMI shielding performance
    • Factory assembled and tested cable for use as an alternative to cable inconduit wiring systems
    • Meets cold impact at -40°C
    • 90°C continuous operating temperature, wet or dry
    • 130°C emergency rating
    • 250°C short circuit rating

    Specifications:
    Design Adherence:
    • ICEA S-95-658/WC70 Standard for Non-Shielded Power Cable, 2 kV or Less
    • UL 44 Rubber Insulated Wires and Cables
    • UL 1569 Metal Clad Cables
    • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations
    • UL 1309 Marine Shipboard Cable
    • CSA C22.2 No. 123 Metal Sheathed Cables
    • CSA C22.2 No. 174 Cables and Cable Glands for Use in Hazardous Locations

    Flame Tests:
    • ICEA T-29-520 (210,000 BTU/hr)
    • IEEE 383 (70,000 BTU/hr)
    • CSA FT4
    • IEEE 1202 (70,000 BTU/hr)
    • UL 1581 (70,000 BTU/hr)
    • IEC 60332-3 Cat. A

    Compliances:
    • UL Type MC-HL, XHHW-2, SUN RES, CT USE, DIR BUR, -40°C, UL File # E90496
    • UL Listed Marine Shipboard, UL File # E85994
    • American Bureau of Shipping (ABS) Listed for CWCMC
    • CSA certified1 Type RA90, XLPE, HL, SR, FT4, and -40°C, CSA File # 7319
    • RoHS Compliant
    1 Standard cables are also marked CSA Type RA90, except four (4) conductor cables which require a different color code, which may be special-ordered.

    cond.
    size
    (awg/
    kcmil)
    no.
    of
    cond.
    insulation
    thickness
    bare
    ground
    (awg)
    nominal
    core o.d.
    nominal
    armor o.d.
    jacket
    thickness
    nominal
    overall o.d.
    cross-
    sectional
    area¹
    approximate
    net weight
    90°c
    ampacity
    @ 30°c
    ambient²
    general cable
    part number
    mils mm inches mm inches mm mils mm inches mm sq. in. lbs/1000 ft kg/1000 m
    14 (7/w)
    (2.08 mm²)
    3 30 0.76 3 x #18 0.33 8.4 0.53 13.5 50 1.27 0.64 16.3 0.33 163 242 15 9600.01403318
    4 30 0.76 3 x #18 0.37 9.4 0.58 14.7 50 1.27 0.69 17.5 0.38 226 336 15 9600.01404318
    12 (7/w)
    (3.31 mm²)
    3 30 0.76 3 x #16 0.37 9.4 0.58 14.7 50 1.27 0.69 17.5 0.38 243 362 20 9600.01203316
    4 30 0.76 3 x #16 0.45 11.4 0.67 17.0 50 1.27 0.78 19.8 0.48 291 433 20 9600.01204316
    10 (7/w)
    (5.26 mm²)
    3 30 0.76 3 x #14 0.41 10.4 0.62 15.7 50 1.27 0.73 18.5 0.42 305 454 30 9600.01003314
    4 30 0.76 3 x #14 0.45 11.4 0.67 17.0 50 1.27 0.78 19.8 0.48 354 527 30 9600.01004314
    8 (7/w)
    (8.36 mm²)
    3 45 1.14 3 x #14 0.50 12.7 0.71 18.0 50 1.27 0.81 20.6 0.52 392 583 55 9600.00803314
    4 45 1.14 1 x #10 0.58 14.7 0.80 20.3 50 1.27 0.90 22.9 0.64 473 704 44 9600.00804110
    6 (7/w)
    (13.3 mm²)
    3 45 1.14 3 x #12 0.58 14.7 0.80 20.3 50 1.27 0.90 22.9 0.64 534 795 75 9600.00603312
    4 45 1.14 1 x #8 0.66 16.8 0.89 22.6 50 1.27 0.99 25.1 0.78 641 954 60 9600.00604108
    4 (7/w)
    (21.2 mm²)
    3 45 1.14 3 x #12 0.68 17.3 0.89 22.6 50 1.27 0.99 25.1 0.78 716 1,066 95 9600.00403312
    4 45 1.14 1 x #8 0.77 19.6 0.97 24.6 50 1.27 1.08 27.4 0.93 860 1,280 76 9600.00404108
    2 (7/w)
    (33.6 mm²)
    3 45 1.14 3 x #10 0.80 20.3 1.02 25.9 50 1.27 1.13 28.7 1.02 1,013 1,507 130 9600.00203310
    4 45 1.14 1 x #6 0.92 23.4 1.15 29.2 50 1.27 1.26 32.0 1.26 1,267 1,885 104 9600.00204106
    1 (19/w)
    (42.4 mm²)
    3 55 1.40 3 x #10 0.92 23.4 1.15 29.2 50 1.27 1.26 32.0 1.26 1,119 1,666 150 9600.00103310
    4 55 1.40 1 x #6 1.04 26.4 1.29 32.8 50 1.27 1.40 35.6 1.56 1,526 2,272 120 9600.00104106
    1/0 (19/w)
    (53.5 mm²)
    3 55 1.40 3 x #10 1.00 25.4 1.24 31.5 50 1.27 1.34 34.0 1.43 1,496 2,226 170 9600.11003310
    4 55 1.40 1 x #6 1.12 28.4 1.37 34.8 50 1.27 1.48 37.6 1.74 1,862 2,771 136 9600.11004106
    2/0 (19/w)
    (67.4 mm²)
    3 55 1.40 3 x #10 1.09 27.7 1.34 34.0 50 1.27 1.44 36.6 1.65 1,801 2,681 195 9600.21003310
    4 55 1.40 1 x #6 1.23 31.2 1.51 38.4 60 1.52 1.64 41.7 2.14 2,351 3,498 156 9600.21004106
    3/0 (19/w)
    (85.0 mm²)
    3 55 1.40 3 x #8 1.21 30.7 1.47 37.3 60 1.52 1.58 40.1 1.99 2,262 3,367 225 9600.31003308
    4 55 1.40 1 x #4 1.36 34.5 1.65 41.9 60 1.52 1.78 45.2 2.52 2,921 4,346 180 9600.31004104
    4/0 (19/w)
    (107 mm²)
    3 55 1.40 3 x #8 1.33 33.8 1.60 40.6 60 1.52 1.73 43.9 2.38 2,722 4,051 260 9600.41003308
    4 55 1.40 1 x #4 1.49 37.8 1.78 45.2 60 1.52 1.91 48.5 2.90 3,491 5,194 208 9600.41004104
    250 (37/w)
    (127 mm²)
    3 65 1.65 3 x #8 1.48 37.6 1.74 44.2 60 1.52 1.87 47.5 3,195 4,755 290 9600.25003308
    4 65 1.65 1 x #4 1.64 41.7 1.96 49.8 60 1.52 2.09 53.1 4,142 6,164 232 9600.25004104
    350 (37/w)
    (177 mm²)
    3 65 1.65 3 x #7 1.66 42.2 1.96 49.8 60 1.52 2.09 53.1 4,284 6,376 350 9600.35003307
    4 65 1.65 1 x #3 1.89 48.0 2.19 55.6 75 1.91 2.35 59.7 5,536 8,238 280 9600.35004103
    500 (37/w)
    (253 mm²)
    3 65 1.65 3 x #6 1.94 49.3 2.28 57.9 75 1.91 2.44 62.0 6,035 8,981 430 9600.50003306
    4 65 1.65 1 x #2 2.14 54.4 2.49 63.2 75 1.91 2.65 67.3 7,704 11,464 344 9600.50004102
    750 (61/w)
    (380 mm²)
    3 80 2.03 3 x #5 2.37 60.2 2.75 69.9 75 1.91 2.92 74.2 8,854 13,176 535 9600.75003305
    4 80 2.03 1 x #1 2.61 66.3 3.03 77.0 85 2.16 3.21 81.5 11,449 17,037 428 9600.75004101
    1000 (61/w)
    (507 mm²)
    3 80 2.03 1 x #1/0 2.67 67.8 3.11 79.0 85 2.16 3.30 83.8 11,611 17,280 615 9600.100031110
    4 80 2.03 1 x #1/0 3.07 78.0 3.63 92.2 85 2.16 3.81 96.8 15,377 22,883 492 9600.100041110

    Quick Quote Form 

    * Indicates required field

    Receive A Response In 5 Minutes Or Less During Regular Business Hours

    Captcha Image

    This product has no related products.

Request a Quote

Receive A Response In 5 Minutes Or Less During Business Hours

Sign up for our newsletter

Register with Nassau today.

Subscribe to Newsletter