• EmPowr 15 kV Longitudinally Applied Corrugated Tape LLDPE Jacket Link and Shielded Power Cable Al Conductor TRXLPE Insulation

    Product Details

    Complete Cable: Lead-free cross-linked semi-conducting conductor shield, insulation and semi-conducting insulation shield are extruded over a solid or stranded aluminum conductor and cured in a single operation. Corrugated copper tape and an extruded black jacket are applied over the cable core. These products meet the latest requirements of ANSI/ICEA S-97-682 and AEIC CS8 as applicable for Tree-Retardant Crosslinked Polyethylene (TRXLPE) insulated shielded power cable.

    Conductor: Solid or Class B compressed concentric lay stranded 1350 aluminum.

    Conductor Shield: Extruded lead-free semi-conducting thermosetting polymeric stress control layer.

    Insulation: Extruded unfilled lead-free Tree-Retardant Cross-linked Polyethylene (TRXLPE).

    Insulation Shield: Extruded lead-free semi-conducting thermosetting layer, clean and free stripping from insulation.

    Longitudinally Applied Corrugated Tape: Copper, 8 or 10 mil thick Longitudinally Applied Corrugated Tape (LACT) with a minimum 375 mil overlap.

    Jacket: Black, non-conducting, sunlight-resistant Linear Low-Density Polyethylene (LLDPE).

    Features and Benefits:
    • Lead-free environmentally friendly cable
    • Even distribution of fault current and better heat dissipation
    • Allows expansion/contraction of the cable core
    • Improved bending characteristics versus helical copper tape shield
    • Triple-extruded for clean interfaces
    • Class 10,000 environment utilized for cable core material handling
    • Excellent moisture resistance
    • High dielectric strength
    • Low dielectric loss
    • Excellent resistance to water treeing
    • Clean-stripping insulation shield
    • Sunlight-resistant

    Temperature Rating:
    • Normal - 90°C
    • Emergency* - 130°C
    • Short Circuit - 250°C

    Applications: EmPowr® Link+ cables are intended for use in dry or wet locations for distribution of three-phase medium-voltage power. These cables may be installed in ducts or direct buried.

    Options:
    • Copper conductors
    • STRANDFILL® blocked conductor. Tested in accordance with ICEA T-31-610
    • BIFILL® tested to ICEA T-34-664 1. blocked conductor 2. blocked cable core/LACT
    • TRIFILL® tested to ICEA T-34-664 1. blocked conductor 2. blocked cable core/LACT 3. sealed overlap and blocked LACT/jacket
    • Sealed LACT overlap
    • True Triple Extrusion
    • Low-strip insulation shield
    • Red stripes on jacket
    • Semi-conducting thermoplastic jacket
    • 3 X 1/C triplex or parallel
    • Type MV-90 UL 1072
    • TRXLPE Class III insulation for 105°/140°C temperature rating
    • UL Listed

    longitudinally applied corrugated tape shielded power cable
    compressed
    conductor
    diameter (1)
    inches
    nominal
    jacket
    thkn.
    inches
    (1)
    approx. weight (1)
    lb/1000 ft
    ampacity (2)
    al
    awg or
    kcmil
    no.
    of
    wires
    insulation lact shield lldpe
    jacket
    al
    cond.
    cu
    shield
    total direct
    buried
    in
    duct
    min. max. thkn. o.d.
    175 mils nominal trxpe insulation – 15 kv 100% insulation level
    250 37 0.920 1.005 0.008 1.104 1.264 0.080 234 131 814 370 285
    250 37 0.920 1.005 0.010 1.110 1.270 0.080 234 164 848 370 285
    350 37 1.015 1.100 0.008 1.207 1.367 0.080 329 157 984 445 345
    350 37 1.015 1.100 0.010 1.213 1.373 0.080 329 191 1020 445 345
    500 37 1.150 1.235 0.008 1.335 1.495 0.080 468 157 1190 545 425
    500 37 1.150 1.235 0.010 1.355 1.495 0.080 468 220 1263 545 425
    750 61 1.340 1.425 0.008 1.536 1.696 0.080 703 199 1574 665 530
    750 61 1.340 1.425 0.010 1.542 1.702 0.080 703 243 1620 665 530
    1000 61 1.485 1.575 0.008 1.685 1.905 0.110 937 208 1996 780 630
    1000 61 1.485 1.575 0.010 1.691 1.911 0.110 937 260 2050 780 630
    220 mils nominal trxpe insulation – 15 kv 133% insulation level
    250 37 1.010 1.100 0.008 1.194 1.354 0.080 234 140 899 370 285
    250 37 1.010 1.100 0.010 1.200 1.360 0.080 234 191 950 370 285
    350 37 1.105 1.190 0.008 1.297 1.457 0.080 329 157 1068 445 345
    350 37 1.105 1.190 0.010 1.303 1.463 0.080 329 191 1103 445 345
    500 37 1.240 1.330 0.008 1.439 1.599 0.080 468 185 1317 545 425
    500 37 1.240 1.330 0.010 1.445 1.605 0.080 468 231 1365 545 425
    750 61 1.430 1.520 0.008 1.626 1.846 0.110 703 203 1778 665 530
    750 61 1.430 1.520 0.010 1.632 1.852 0.110 703 254 1830 665 530
    1000 61 1.575 1.670 0.008 1.775 1.995 0.110 937 222 2124 780 630
    1000 61 1.575 1.670 0.010 1.781 2.001 0.110 937 277 2181 780 630

    Quick Quote Form 

    * Indicates required field

    Receive A Response In 5 Minutes Or Less During Regular Business Hours

    Captcha Image

    This product has no related products.

Request a Quote

Receive A Response In 5 Minutes Or Less During Business Hours

Sign up for our newsletter

Register with Nassau today.

Subscribe to Newsletter