Helukabel 24 AWG 7 Cores Supertronic-330 C-PURö Cable For Drag Chains Halogen Free EMC-Preferred Type Meter Marking Cable 49812

Helukabel 24 AWG 7 Cores Supertronic-330 C-PURö Cable For Drag Chains Halogen Free EMC-Preferred Type Meter Marking Cable 49812

Select gauge from drop-down menu for prices:

Helukabel 24 AWG 7 Cores Supertronic-330 C-PURö Cable For Drag Chains Halogen Free EMC-Preferred Type Meter Marking Cable 49812
Helukabel 24 AWG 7 Cores Supertronic-330 C-PURö Cable For Drag Chains Halogen Free EMC-Preferred Type Meter Marking Cable 49812

Technical Data:
• Special PUR sheathed cable, screened

Temperature Range:
• flexing -30°C to +80°C
• fixed installation -40°C to +80°C

Nominal Voltage:
• 300 V

Test Voltage:
• core/core 1500 V
• core/screen 1000 V

Insulation Resistance:
• min. 100 MOhm x km

Capacitance:
• core/core 60 nF/km

Minimum Bending Radius:
• flexing 7,5x cable Ø
• fixed installation 4x cable Ø

Radiation Resistance:
• up to 100x106 cJ/kg (up to 100 Mrad)

Coupling Resistance:
• max. 250 Ohm/km

Cable Structure:
• Bare copper conductor, extra fine wire, acc. to DIN VDE 0295 cl.6, col. 4, BS 6360 cl.6
• Core insulation of PP
• Core identification to DIN 47100 coloured
• Cores stranded in layers with optimal lay length
• Wrapping over the outer layer
• Braided screen of tinned Cu wires, coverage approx. 85%
• Core wrapping with fleece
• Outer sheath of special full polyurethane compound type TMPU to DIN VDE 0207-363-10-2 / DIN EN 50363-10-2 and acc. to UL Std.1581 tab.50227
• Sheath colour: grey (RAL 7001)
• With meter marking

Properties:
• The materials used during manufacturing are cadmium-free, contain no silicone and are free from substances harmful to the wetting properties of lacquers
• Low-adhesion
• High flexibility at low temperatures
• High abrasion resistance
• Tear and cut-resistant
• Notch resistant

Resistant To:
• UV-radiation, Oxygen, Ozone, Hydrolysis, Oil

Partially Resistant To:
• Microbial attack, Hydraulic fluid, Coolant emulsion, Alkalis

Tests:
• PUR outer sheath, flame retardant acc. to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1-2 (equivalent DIN VDE 0472 part 804 test method B)

Note:
• AWG sizes are approximate equivalent values. The actual cross section is in mm².

Application:
• Especially suited for drag chain installation in dry, moist and wet environments and outdoors with flexible movement and without tensile stress or forced movements. A highly flexible PVC control cable suitable for frequent and fast lifting and bending stresses in machines and tool building, robot systems and on constantly moving machine components. Long service lives guarantee reliable function and good cost efficiency. The dense screening assures interference-free transmission of all signals and impulses. An ideal interference-free control cable for the above applications. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see chapter "Technical infromations".
• EMC = Electromagnetic compatibility
• To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
• = Product conforms with Low-Voltage Directive 2014/35/EU.

technical specification:
awg-no. 24
no.cores x cross-sec. mm² 7 X 0,25
outer ø app. - mm 6,6
cop. weight - kg/km 39,6
weight app. - kg/km 82,0
helukabel part number 49812

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question