• 5KV UL Type MV-105, MC-HL, Shielded, EPR Insulation 100% and 133%, Alum Copper

    5KV UL Type MV-105, MC-HL, Shielded, EPR Insulation 100% and 133%, Alum Copper

    Select gauge from drop-down menu for prices:


    Free Shipping

    No End Date

    Click to View Shopping Cart

    Product Details

    Specifications:

    • Impervious Continuously Welded Armor - Power Cable
    • 5KV UL Type MV-105, MC-HL, CT Use, 105°C
    • Shielded, EPR Insulation
    • 100% and 133% Insulation Level
    • Aluminum Armor
    • Copper Conductors

    Application:
    For use in harsh environments where maximum conductor protection is required. Used for primary power and feeder circuits in a broad range of commercial and industrial power distribution systems. Approved for use in wet or dry locations at 105°C, for installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 5000 volts. UL listed, Type MC-HL per UL Standard 2225 for use in Class I, Division I hazardous locations. UL approved for use at 105°C for continuous operation, 140°C for emergency overload conditions, and 250°C for short circuit conditions. Impervious continuously welded and corrugated aluminum armor cable is recommended as an economical alternative to wire in conduit systems.

    Conductors:
    Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 (compressed) or ASTM B-496 (compact), with a semi-conducting conductor shield.

    Insulation:
    Ethylene propylene rubber (EPR) per ICEA S-97-682/S-93-639 with a semi-conducting insulation shield.

    Shield:
    Uncoated 5 mil copper tape with a minimum of 12.5% overlap.

    Grounding Conductor:
    Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 sized in accordance with UL Standard 1072.

    Armor:
    Impervious continuously welded and corrugated aluminum.

    Jacket:
    Yellow flame-retardant and sunlight-resistant PVC.

    Flame Tests:

    ICEA 70,000 BTU/hr and 210,000 BTU/hr flame test

    Color Code:

    ICEA Method 4

    Additional Standards:

    • UL listed, NEC Type MV-105 and Type MC, UL Standard 1072.
    • Single conductors are qualified per AEIC CS8.
    • UL listed Type CWCMC to IEEE 45/IEEE 1580 (46 CFR Part 111.60-23) Marine Shipboard Cable.
    • Meets requirements of CSA-C22.2 No. 0.3, -40°C cold impact test.

    Connectors:

    • Explosion Proof, Class I Division 1: 424MA series - all nickel-plated aluminum
    • Rain Tight: 416MC series - all nickel-plated brass
    Power Size
    AWG/kcmil
    No. of Strands Ground Wire Size AWG Class 1 Div. 1
    Connector No.
    Rain Tight
    Connector No.
    Armor
    Diameter Inch
    Overall
    Diameter Inch
    Net Weight
    Lbs./Mft
    Catalog Number
    6 7 6 424MA06 416MC07 1.51 1.61 1205 HW310 00603 /
    HW31000603

    4 7 6 424MA06 416MC08 1.64 1.76 1450 HW310 00403 /
    HW31000403

    2 7 6 424MA07 416MC08 1.80 1.92 1880 HW310 00203 /
    HW31000203

    1 19 4 424MA07 416MC08 1.87 1.99 2100 HW310 00103 /
    HW31000103

    1/0 19 4 424MA07 416MC08 1.94 2.06 2375 HW310 10103 /
    HW31010103

    2/0 19 4 424MA07 416MC08 2.02 2.14 2715 HW310 20103 /
    HW31020103

    4/0 19 3 424MA08 416MC09 2.25 2.37 3685 HW310 40103 /
    HW31040103

    250 19 3 424MA08 416MC09 2.41 2.56 4300 HW310 25003 /
    HW31025003

    350 37 2 424MA09 416MC09 2.71 2.86 5530 HW310 35003 /
    HW31035003

    500 37 1 424MA10 416MC10 3.03 3.21 7245 HW310 50003 /
    HW31050003


    Quick Quote Form 

    * Indicates required field

    Receive A Response In 5 Minutes Or Less During Regular Business Hours

    Captcha Image

    This product has no related products.

    NOW VIEWING

    5KV UL Type MV-105, MC-HL, Shielded, EPR Insulation 100% and 133%, Alum Copper

    Request a Quote

Request a Quote

Receive A Response In 5 Minutes Or Less During Business Hours

Sign up for our newsletter

Register with Nassau today.

Subscribe to Newsletter