HW151 Tray Cable - Control Cable 600 Volt UL Type TC-ER* THHN or THWN Insulation PVC Jacket - 10 AWG - 16 Conductors

HW151 Tray Cable - Control Cable 600 Volt UL Type TC-ER* THHN or THWN Insulation PVC Jacket - 10 AWG - 16 Conductors

Select gauge from drop-down menu for prices:

HW151 Tray Cable - Control Cable 600 Volt UL Type TC-ER* THHN or THWN Insulation PVC Jacket - 10 AWG - 16 Conductors
HW151 Tray Cable - Control Cable 600 Volt UL Type TC-ER* THHN or THWN Insulation PVC Jacket - 10 AWG - 16 Conductors
Technical Specifications:
Product Code HW151 01016
Size AWG 10
No. of Conductors 16
No. of Strands 7
Ground Wire Size AWG N/A
Nylon Jacket Thickness Mils 4
Insulation Thickness Mils 20
Jacket Thickness Mils 80
Overall Diameter Inch 0.97
Net Weight Lbs/Mft 817

Specifications:

  • HW151
  • Tray Cable - Control Cable
  • 600 Volt UL Type TC-ER*
  • THHN or THWN Insulation
  • PVC Jacket

Notes:
* Flat Construction

Application:
General purpose cable for use in power, control and lighting circuits in a broad range of commerical and industrial applications. Approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts. May be used in NEC Class I and II, Division 2 hazardous locations. UL approved for use in continuous operation at 75°C in wet locations, 90°C in dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.

Conductors:
Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8.

Insulation: XLPE:
Flame-retardent PVC per UL Standard 83 stranding per ASTM B-8.

Insulation Jacket:
Clear nylon per UL Standard 83 for Type THHN or THWN wire.

Jacket:
Sunlight-resistant PVC per UL Standard 1277.

Flame Tests:
IEEE 383 70,000 BTU/hr flame test

Color Code:
ICEA Method 1, Table E-2

Additional Standards:

  • UL Type TC per Article 336 of the NEC
  • Approved for Class 1 remote-control and signaling circuits per Article 725 of the NEC

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question