TYPE TC-ER - INSTRUMENTATION TRAY CABLE Shielded Pairs with Overall Shield PVC/Nylon Insulation with Overall PVC Jacket - 600 Volts - 90 Degrees C Dry/Wet - 18 AWG - 16 Pairs

TYPE TC-ER - INSTRUMENTATION TRAY CABLE Shielded Pairs with Overall Shield PVC/Nylon Insulation with Overall PVC Jacket - 600 Volts - 90 Degrees C Dry/Wet - 18 AWG - 16 Pairs

Select gauge from drop-down menu for prices:

TYPE TC-ER - INSTRUMENTATION TRAY CABLE Shielded Pairs with Overall Shield PVC/Nylon Insulation with Overall PVC Jacket - 600 Volts - 90 Degrees C Dry/Wet - 18 AWG - 16 Pairs

Technical Specifications:
Product Code 6816SPOS
Size AWG 18
No. of Pairs 16
OA Jkt. Thick. (MILS) 80
Appr. O.D. (IN) .929
Appr. Weight Lbs./ M Ft. 411
Stranding 7
PVC Insulation Thickness (Mils) 15
Nylon Armor (Mils) 5
Approximate O.D. (Inches) .086

Specifications:

  • TRAY CABLE - THHN/PVC SHIELDED PAIRS WITH OVERALL SHIELD
  • TYPE TC-ER - INSTRUMENTATION TRAY CABLE
  • Shielded Pairs with Overall Shield PVC/Nylon Insulation with Overall PVC Jacket
  • 18 - 16 AWG • 600 Volts • 90°C Dry/Wet

Description:
ADC’s Type TC-ER shielded pairs with an overall shield have a PVC/Nylon insulation with an overall gas and oil resistant PVC jacket.

Application:
Suitable for use in Class 1 or 2, Division 2 hazardous locations and for installation in trays, wireways, troughs, channels, ducts and conduit. Expressly approved for direct burial, wet or dry locations and outdoors in cable trays where sunlight resistant rating is required.

Conductors:
Soft Drawn Annealed Bare Copper per ASTM B-3 and B-8. Concentric 7 strand. Concentric 19 strand available upon request as well as Tinned Copper.

Insulation PVC:
Thickness: Per UL 66 Table 4.7

Conductor Jacket: Nylon:
Thickness: Per UL 66 paragraph 9.1

Cabling:
Pairs are cabled with stagger lays and wrapped with foil free edge aluminum mylar tape with a flexible tinned copper drain wire.

Overall Shield:
Aluminum mylar tape providing 100% coverage with a flexible stranded tinned copper drain wire.

Overall Jacket:
A black, fame resistant, Polyvinyl Chloride (PVC) jacket is extruded over the assembly. The surface profile shall approximate that of the interior assembly. A rip cord shall be inserted under the jacket for ease of stripping.

Color Code:
Method 1 - Black and White (White conductor in each pair printed alphanumerically for easy identification)

Industry Listings and Standards:

  • UL Listed as TC-ER per UL Standard 1277
  • Rated -40°C to 90°C
  • OSHA Acceptable
  • NEC Articles 392 & 336
  • CSA FT4
  • IEEE 1202 70,000 BTU Flame Test
  • ASTM - All Applicable Standards

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question