General Cable Anaconda® Brand Type SHD-GC Power Shielded Round Portable w/Ground-Check EPR CPE 8000 Volts Three Conductor

General Cable Anaconda® Brand Type SHD-GC Power Shielded Round Portable w/Ground-Check EPR CPE 8000 Volts Three Conductor

Select gauge from drop-down menu for prices:

General Cable Anaconda® Brand Type SHD-GC Power Shielded Round Portable w/Ground-Check EPR CPE 8000 Volts Three Conductor

Product Details

Conductor: 4 AWG thru 500 kcmil coated annealed copper, bunched wires, rope-lay-stranded per ASTM B172 

Extruded Strand Shield (ESS):  Extruded thermosetting semi-conducting stress control layer over conductor

Insulation:  Ethylene Propylene Rubber (EPR) insulation colored for contrast with black conducting layer

Insulation Shield:  A flexible coated copper/textile braid shield is applied over a conducting overlapped tape 

Ground-Check Conductor: Annealed copper, rope-lay-stranded per ASTM B172, insulated with high-strength yellow polypropylene

Grounding Conductors: 
 • Coated copper, rope-lay-stranded per ASTM B172 
 • Two conductors in contact with the flexible copper braid shield 

Jacket:  Reinforced, two-layer, extra-heavy-duty, leadcured Chlorinated Polyethylene (CPE) 

Jacket Marking:  GENERAL CABLE® ANACONDA® BRAND (SIZE) 3/C TYPE SHD-GC 8000 VOLTS P-7K-102-046 MSHA
 
Options: 
 • Colored jackets are available 
 • TPU (Thermoplastic Polyurethane) jacket 
 • Anamaxx® jacket 

Applications: 
• Designed for use as a trailing cable on AC mining equipment:
- Where service conditions are severe and maximum safety is mandatory (such as power shovels and draglines in open-pit mines,  quarries, gantry cranes and slag reclaiming) 
- For high-voltage distribution in underground mines where frequent relocation is necessary

Features: 
 • Simultaneous extrusion and vulcanization of both strand shield and insulation form a virtually perfect electrode, eliminating unequal electrical stresses 
 • Excellent heat, moisture, steam, oil, corona, chemical and radiation resistance 
 • Flexible for easy handling
 • High dielectric strength
 • Electrical stability under stress 
 • Low dielectric loss 
 • Resists cutting, impact, abrasion, flame and sunlight 
 • Excellent thermal stability and physical properties over a broad temperature range 
 • Two-layer jacket is reinforced to provide maximum protection from mechanical damage—the cause of most portable cable failures 

Compliances:
 • ICEA S-75-381 Portable and Power Feeder Cables for use in mines and similar applications
 • Meets flame test requirements and is accepted for listing by MSHA 
 • Approved by the Pennsylvania Department of Environmental Protection 

Packaging:  Material cut to length and shipped on nonreturnable reels

cond. size
(awg /Kcmil)
no. of cond. ampacity general cable and
anaconda brand
part number
Action
4 3 122 16243.310400 Request a Quote
2 3 159 16243.310200 Request a Quote
1 3 184 16243.310100 Request a Quote
1/0 3 211 16243.615100 Request a Quote
2/0 3 243 16252.201837 Request a Quote
3/0 3 279 16243.615300 Request a Quote
4/0 3 321 16254.709412 Request a Quote
250 3 355 16243.616000 Request a Quote
300 3 398 16243.616100 Request a Quote
350 3 435 16243.616200 Request a Quote
500 3 536 16243.616500 Request a Quote

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question