Type SHD-GC-8kV

Type SHD-GC-8kV

Product Details

Applications: This cable is designed for high voltage connections between power distribution systems in mines, mine tunnels, shafts, and mine load centers where continuous monitoring of the ground system is required. This cable is suitable for installation in Ducts, troughs, tray or direct burial for nonflexing service.

Construction:Conductor is stranded annealed copper enveloped in a strand shield. Insulation is Ethylene Proplylene Rubber (EPR) or Cross Linked Polyethylene (XLPE). Assembly is semi-conducting tape and a metallic tape shield with grounding conductors consisting of two bare grounds and one 8-gauge insulated ground check that are cabled together in the interstices of the power conductors and fillers are added to make round. A single faced rubber filled tape is applied overlapped. Jacket is Chlorinated Polyethylene (CPE). Standards Conforms to ICEA S-66-524 (NEMA WC8).

Size
(AWG or KCMIL)
Number of Conduc
-tors in Cable
Diameter Complete Cable (O.D.) (Inches) Weight Per 1000ft Total (Lbs.) Action
SHD-GC - 4 Gauge 3 1.94 2240 Request a Quote
SHD-GC - 2 Gauge 3 2.12 2730 Request a Quote
SHD-GC - 1/0 3 2.32 3380 Request a Quote
SHD-GC - 2/0 3 2.46 4030 Request a Quote
SHD-GC - 4/0 3 2.75 5440 Request a Quote
SHD-GC - 250MCM 3 2.89 6280 Request a Quote
SHD-GC - 350MCM 3 3.20 8300 Request a Quote
SHD-GC - 500MCM 3 3.56 12000 Request a Quote

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question