Type SHD-GC-2kV

Type SHD-GC-2kV

Product Details

Applications: This cable is designed for high voltage connections between power distribution systems in mines, mine tunnels, shafts, and mine load centers where continuous monitoring of the ground system is required. This cable is suitable for installation in Ducts, troughs, tray or direct burial for nonflexing service.

Construction:Conductor is stranded annealed copper enveloped in a strand shield. Insulation is Ethylene Proplylene Rubber (EPR) or Cross Linked Polyethylene (XLPE). Assembly is semi-conducting tape and a metallic tape shield with grounding conductors consisting of two bare grounds and one 8-gauge insulated ground check that are cabled together in the interstices of the power conductors and fillers are added to make round. A single faced rubber filled tape is applied overlapped. Jacket is Chlorinated Polyethylene (CPE). Standards Conforms to ICEA S-66-524 (NEMA WC8).

Size
(AWG or KCMIL)
Number of Conduc
-tors in Cable
Diameter Complete Cable (O.D.) Weight Per 1000ft Total (Lbs.) Action
SHD-GC - 6 Gauge 3 1.56 1460 Request a Quote
SHD-GC - 4 Gauge 3 1.68 1690 Request a Quote
SHD-GC - 2 Gauge 3 1.87 2290 Request a Quote
SHD-GC - 1/0 3 2.08 3110 Request a Quote
SHD-GC - 2/0 3 2.20 3570 Request a Quote
SHD-GC - 4/0 3 2.50 4990 Request a Quote
SHD-GC - 250MCM 3 2.69 5820 Request a Quote
SHD-GC - 350MCM 3 2.95 7540 Request a Quote
SHD-GC - 500MCM 3 3.31 9840 Request a Quote

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question