General Cable Anaconda® Brand Type SHD-GC Power Shielded Round Portable w/Ground-Check EPR CPE 15000 Volts Three Conductor

General Cable Anaconda® Brand Type SHD-GC Power Shielded Round Portable w/Ground-Check EPR CPE 15000 Volts Three Conductor

Product Details

Conductor: 2 AWG thru 500 kcmil coated annealed copper, bunched wires, rope-lay-stranded per ASTM B172

Extruded Strand Shield (ESS): Extruded thermosetting semi-conducting stress control layer over conductor

Insulation: Ethylene Propylene Rubber (EPR) insulation colored for contrast with black conducting layer

Insulation Shield: A flexible coated copper/textile braid shield is applied over a conducting overlapped tape

Ground-Check Conductor: Annealed copper, rope-lay-stranded per ASTM B172, insulated with high-strength yellow polypropylene 

Grounding Conductors:
• Coated copper, rope-lay-stranded per ASTM B172
• Two conductors in contact with the flexible copper braid shield 

Jacket: Reinforced, two-layer, extra-heavy-duty, lead-cured Chlorinated Polyethylene (CPE)

Jacket Marking: GENERAL CABLE® ANACONDA® BRAND (SIZE) 3/C TYPE SHD-GC 15000 VOLTS P-7K-102-046 MSHA 

Options:
• Colored jackets are available
• TPU (Thermoplastic Polyurethane) jacket
• Anamaxx® jacket

 Applications:
• Designed for use as a trailing cable on AC mining equipment:
 - Where service conditions are severe and maximum safety is mandatory (such as power shovels and draglines in open-pit mines, quarries,gantry cranes and slag reclaiming)
 - For high-voltage distribution in underground mines where frequent relocation is necessary

Features:
• Simultaneous extrusion and vulcanization of both strand shield and insulation form a virtually perfect electrode, eliminating unequal electrical stresses
• Excellent heat, moisture, steam, oil, corona, chemical and radiation resistance
• Flexible for easy handling
• High dielectric strength
• Electrical stability under stress
• Low dielectric loss
• Resists cutting, impact, abrasion, flame and sunlight
• Excellent thermal stability and physical properties over a broad temperature range
• Two-layer jacket is reinforced to provide maximum protection from mechanical damage— the cause of most portable cable failures

Compliances:
• ICEA S-75-381 Portable and Power Feeder Cables for use in mines and similar applications
• Meets flame test requirements and is accepted for listing by MSHA
• Approved by the Pennsylvania Department of Environmental Protection

Packaging: Material cut to length and shipped on nonreturnable reels

cond. size
(awg /Kcmil)
no. of cond. ampacity general cable and
anaconda brand
part number
Action
2 3 164 16245.310200 Request a Quote
1 3 187 16245.310100 Request a Quote
1/0 3 215 16245.315100 Request a Quote
2/0 3 246 16299.625200 Request a Quote
3/0 3 283 16245.615300 Request a Quote
4/0 3 325 16245.615400 Request a Quote
250 3 359 16245.616000 Request a Quote
350 3 437 16245.616200 Request a Quote
500 3 534 16245.616500 Request a Quote

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question