General Cable EmPowr® 750kcmil 15 kV Copper Tape PVC Jacket Link and Shielded Power Cable Al Conductor TRXLPE Insulation 175 mils

General Cable EmPowr® 750kcmil 15 kV Copper Tape PVC Jacket Link and Shielded Power Cable Al Conductor TRXLPE Insulation 175 mils

Select gauge from drop-down menu for prices:

General Cable EmPowr® 750kcmil 15 kV Copper Tape PVC Jacket Link and Shielded Power Cable Al Conductor TRXLPE Insulation 175 mils
EmPowr 750kcmil 15 kV Copper Tape PVC Jacket Link and Shielded Power Cable Al Conductor TRXLPE Insulation 175 mils

Complete Cable: Lead-free cross-linked semi-conducting conductor shield, insulation and semi-conducting insulation shield are extruded over a solid or stranded aluminum conductor and cured in a single operation. Uncoated copper tape (helically applied) and overlaying black PVC jacket are applied over the cable core. These products meet the latest requirements of ANSI/ICEA S-97-682 and AEIC CS8 as applicable for Tree-Retardant Cross-linked Polyethylene (TRXLPE) insulated shielded power cable. 

Conductor: Solid or Class B compressed concentric lay stranded 1350 aluminum. 

Conductor Shield: Extruded lead-free semi-conducting thermosetting polymeric stress control layer. 

Insulation: Extruded unfilled lead-free Tree-Retardant Cross-linked Polyethylene (TRXLPE). 

Insulation Shield: Extruded lead-free semi-conducting thermosetting layer, clean and free stripping from insulation. 

Copper Tape: Flat uncoated 5-mil-thick copper tape helically applied with minimum 15% overlap. 

Jacket: Black, non-conducting, sunlight-resistant Polyvinyl Chloride (PVC). 

Features and Benefits: 
• Lead-free environmentally friendly cable 
• Triple-extruded for clean interfaces 
• Dry nitrogen cure for enhanced performance 
• Class 10,000 environment utilized for cable core material handling 
• Excellent moisture resistance 
• High dielectric strength 
• Low dielectric loss 
• Excellent resistance to water treeing 
• Clean-stripping insulation shield 
• Sunlight-resistant 

Temperature Rating: 
• Normal - 90°C 
• Emergency* - 130°C 
• Short Circuit - 250°C 

Applications: EmPowr® Link+ cables are intended for use in dry or wet locations for distribution of threephase medium-voltage power. These cables may be installed in ducts or direct buried. 

Options: 
• Copper conductors 
• STRANDFILL® blocked conductor. Tested in accordance with ICEA T-31-610 
• True Triple Extrusion 
• UltraPowr® smoother and cleaner semiconducting conductor shield 
• Low-strip insulation shield 
• 3 X 1/C triplex or parallel 
• 3 shielded cores cabled with fillers, with or without ground conductor, and with an overall jacket 
• Type MV-90 UL 1072
• TRXLPE Class III insulation for 105°/140°C temperature rating 
• Type MV-105 UL 1072 
• UL Listed 
• EPR insulation – see Uniblend® in our Industrial catalog

technical specifications:
compressed conductor(al awg or kcmil) 750
compressed conductor(no. of wires) 61
diameter (1) inches(min. insulation) 1.340
diameter (1) inches(max. insulation)
1.425
diameter (1) inches(5 mil copper tape) 1.444
diameter (1) inches(pvc jacket) 1.603
nominal jacket thkn. inches (1) 0.080
approx. weight (1) lb/1000 ft(al cond.) 703
approx. weight (1) lb/1000 ft(cu shield)
102
approx. weight (1) lb/1000 ft(total) 1410
ampacity (2) (direct buried) 655
ampacity (2) (in duct) 510

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question