Instrumentation 300 Volt UL Type PLTC, ITC - Pairs or Triads Aluminum Armor Copper

Instrumentation 300 Volt UL Type PLTC, ITC - Pairs or Triads Aluminum Armor Copper

Instrumentation 300 Volt UL Type PLTC, ITC - Pairs or Triads Aluminum Armor CopperInstrumentation 300 Volt UL Type PLTC, ITC - Pairs or Triads Aluminum Armor Copper

Specifications:

  • Impervious Continuously Welded Armor - Instrumentation Cable
  • 300 Volt UL Type PLTC, ITC, 105°C
  • Single Pair and Triad - Shielded
  • Multiple Shielded Pairs or Triads with Overall Shield
  • Aluminum Armor
  • Copper Conductors

Application:
For use in harsh environments where maximum conductor and electrostatic interference protection is required. Impervious armor prevents the entrance of water, gas and corrosive elements into the electrical core. Used for instrumentation and process and control applications in a broad range of commercial and industrial pulp and paper, mining, and petroleum applications. Approved for continuous use at 105°C in wet or dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions. May be installed indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 300 volts. UL listed as, NEC Type MC per UL Standard 1569 and is approved for use in Class I, Division 2 hazardous locations. Impervious continuously welded and corrugated aluminum armor cable is recommended as an economical alternative to wire in conduit systems.

Conductors:
Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 (compressed) or ASTM B-496 (compact).

Insulation:
Flame-retardant PVC Individual Shield: Aluminum-polymer tape providing 100% coverage with a flexible 7-strand tinned copper drain wire.

Overall Shield:
Aluminum-polymer tape providing 100% coverage with a flexible 7-strand tinned copper drain wire.

Communication Wire:
22AWG stranded bare copper wire with PVC insulation.

Inner Jacket:
Flame-retardant PVC

Armor:
Impervious continuously welded and corrugated aluminum.

Jacket:
Black sunlight-resistant PVC

Flame Tests:

  • UL 1581 70,000 BTU/hr flame test
  • ICEA 70,000 BTU/hr and 210,000 BTU/hr flame test
  • IEEE 383 70,000 BTU/hr flame test

Color Code:

  • ICEA Method 9: black and white for pairs and black, white and red for triads with printed number

Additional Standards:

  • Individual conductors a UL listed as Type FPL
  • Meets requirements of CSA-C22.2 No. 0.3, -40°C cold impact test

Connectors:

  • Explosion Proof, Class 1 Division 2: 424CU series – aluminum exterior components, nickel-plated brass interior components
  • Rain Tight: 416MC series – all nickel-plated brass
Size
AWG
No. of
Pairs
Net Weight
Lbs./Mft
Product Code Action
18 2 185 HW304 1802P /
HW3041802P
Request A Quote
18 4 271 HW304 1804P /
HW3041804P
Request A Quote
18 8 385 HW304 1808P /
HW3041808P
Request A Quote
18 12 540 HW304 1812P /
HW3041812P
Request A Quote
18 24 920 HW304 1824P /
HW3041824P
Request A Quote
18 36 1190 HW304 1836P /
HW3041836P
Request A Quote
16 1 Pair 110 HW304 1601P /
HW3041601P
Request A Quote
16 1 Triad 129 HW304 1601T /
HW3041601T
Request A Quote
16 2 Pair 241 HW304 1602P /
HW3041602P
Request A Quote
16 3 Pair 280 HW304 1603P /
HW3041603P
Request A Quote
16 4 Pair 280 HW304 1604P /
HW3041604P
Request A Quote
16 4 Triad 400 HW304 1604T /
HW3041604T
Request A Quote
16 6 Pair 410 HW304 1606P /
HW3041606P
Request A Quote
16 8 Pair 511 HW304 1608P /
HW3041608P
Request A Quote
16 12 Pair 511 HW304 1608P /
HW3041608P
Request A Quote
16 24 Pair 1165 HW304 1624P /
HW3041624P
Request A Quote
16 36 Pair 1615 HW304 1636P /
HW3041636P
Request A Quote

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question