General Cable GenFree Uniblend® High Speed Type MV-105 250MCM 115 Mils ST1 EPR Copper Tape Shield LSZH Medium Voltage Power Shielded 5 kV and 8 kV UL

General Cable GenFree Uniblend® High Speed Type MV-105 250MCM 115 Mils ST1 EPR Copper Tape Shield LSZH Medium Voltage Power Shielded 5 kV and 8 kV UL

Select gauge from drop-down menu for prices:

General Cable GenFree Uniblend® High Speed Type MV-105 250MCM 115 Mils ST1 EPR Copper Tape Shield LSZH Medium Voltage Power Shielded 5 kV and 8 kV UL

Product Details

Conductor: 6 AWG thru 1000 kcmil annealed bare copper compact Class B strand

Extruded Strand Shield (ESS): Extruded thermoset semi-conducting stresscontrol layer over conductor

Insulation: Lead-free Ethylene Propylene Rubber (EPR) insulation, contrasting in color to the black semi-conducting shield layers

Extruded Insulation Shield (EIS): Thermoset semi-conducting polymeric layer free stripping from insulation

Metallic Shield: 5 mil annealed copper tape with an overlap of 25% Overall

Jacket: Lead-free, moisture- and sunlight-resistant Low-Smoke, Zero-Halogen Polyolefin (LSZH)

Options: STRANDFILL® – blocked conductor. Tested in accordance with ICEA T-31-61

Applications:
• Superior performance in petrochemical plants, pulp and paper mills, sewage and water treatment plants, environmental protection systems, railroads, mines, utility power generating stations, steel mills, textile plants and other industrial three-phase applications
• For use in wet or dry locations when installed in accordance with NEC
• For use in aerial, conduit, open tray and underground duct installations
• For use in direct burial if installed in a system with a ground conductor that is in close proximity, and conforms with NEC 250.4(A)(5)

Features:
• Rated at 105?C
• Excellent heat and moisture resistance
• Excellent flame resistance
• Outstanding corona resistance
• Low friction for easy pulling
• Flexibility for easy handling
• High dielectric strength
• Low moisture absorption
• Electrical stability under stress
• Low dielectric loss
• Chemical-resistant
• Meets cold bend test at -35?C
• 105°C rating for continuous operation
• 140°C rating for emergency overload conditions
• 250°C rating for short circuit conditions

Compliances:
• National Electrical Code (NEC)
• UL 1072
• ICEA S-93-639/NEMA WC74
• ICEA S-97-682
• ICEA T-33-655
• AEIC CS8
• UL listed as Type MV-105 for use in accordance with NEC, UL File # E90501
• UL 1685 (Sizes 1/0 AWG and larger) UL Flame Exposure Test
• UL 1685 Vertical Flame and Smoke Release Test
• Sizes 1/0 AWG and larger are listed and marked “Sunlight-Resistant FOR CT USE” in accordance with NEC
• IEEE 1202 (70,000 BTU/hr)/CSA FT4
• EPA 40 CFR, Part 261 for leachable lead content per TCLP method
• OSHA Acceptable
• RoHS Compliant

Packaging:
• Material cut to length and shipped on non-returnable wood reels. Lengths in excess of 10,000 lbs. are provided on returnable steel reels that require a deposit
• Extra charges apply for cuts less than 1000 ft., lagging, pulling eyes, paralleling and triplexing

technical specification
cond. size (awg/kcmil) 250
nominal conductor diameter(inches) 0.53
insulation diameter inches(min.) 0.770
insulation diameter inches(max.) 0.850
nominal jacket thickness(inches) 0.080
nominal jacket thickness(mm) 2.03
nominal cable(diameter in inches) 1.05
nominal cable(diameter in mm) 27.18
nominal cable(weight in lbs/1000ft) 1199
nominal cable(weight in kg/km) 1784
copper weight(lbs/1000ft) 849
copper weight(kg/km) 1263
ampacity(conduit in air (1) in 90?c) 330
ampacity(conduit in air (1) in 105?c) 365
ampacity(underground duct (2) in 90?c) 325
ampacity(underground duct (2) in 105?c) 345
ampacity(tray (3) in 90?c) 335
ampacity(tray (3) in 105?c) 370
conduit sizing (4) (inches) 3.5
catalog number 17201.136005*

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question